1 Overview
1.1 Hardware Specifications
Table 1-1 describes the technical specifications of the eA380.
Table 1-1 Technical specifications of the eA380
|
Category |
Description |
|||
|
Technical standards |
WAN: LTE 3GPP Release 11/12 |
|||
|
LAN: IEEE 802.3/802.3u |
||||
|
WLAN: IEEE 802.11b/g/n |
||||
|
Working frequency band |
LTE |
eA380-123: LTE TDD (2570 MHz to 2620 MHz) LTE TDD (2300 MHz to 2400 MHz) LTE FDD (2500 MHz to 2570 MHz(UL)/ 2620 MHz to 2690 MHz(DL)) eA380-135: LTE TDD (3400 MHz to 3600 MHz) LTE TDD (3600 MHz to 3800 MHz) |
||
|
WLAN |
2400 MHz to 2483.5 MHz |
|||
|
External interface |
l 1 Ethernet and voice interface (RJ45): 10/100/1000Base-TX Ethernet, PoE combined l 1 USB interface(for local maintenance only) l 1 SIM card slot |
|||
|
LED indicator |
l One POWER indicator l One LAN indicator l Three LTE signal strength indicators |
|||
|
Maximum transmit power |
LTE |
l (23±2) dBm |
||
|
WLAN |
l (16±3) dBm |
|||
|
EIRP |
WiFi 2.4G |
< 20 dBm |
||
|
Receiving sensitivity |
LTE |
eA380-123 |
B38/B40: l < -100 dBm/5 MHz l < -97 dBm/10 MHz l < -94 dBm/20 MHz |
|
|
B7: l < -98 dBm/5 MHz l < -95 dBm/10 MHz l < -92 dBm/20 MHz |
||||
|
eA380-135 |
B42/B43: l < -99 dBm/5 MHz l < -96 dBm/10 MHz l < -93 dBm/20 MHz |
|||
|
WLAN |
l 802.11b: -92 dBm@1 Mbps, -85 dBm@11 Mbps l 802.11g: -88 dBm@6 Mbps -73 dBm@54 Mbps l 802.11n: HT20: -87 dBm@MCS0 -71 dBm@MCS7 HT40: -84 dBm@MCS0 -68 dBm@MCS7 |
|||
|
Power consumption |
when heater works (<25W) when heater off (<9W) |
|||
|
Power supply |
l PoE (should be powered by IEEE802.3at standard) l PoE adapter: AC 100V~240V,DC 54V/650mA |
|||
|
Dimensions (W×D×H) |
258 mm x 220 mm x85 mm |
|||
|
Weight |
<1.5kg (The power supply adapter is not included) |
|||
|
Water and dust proof |
IP65 |
|||
|
Temperature |
l Working temperature: -40 ℃ to +55 ℃ l Storage temperature: -40 ℃ to +70 ℃ |
|||
|
Humidity |
5% to 95% |
|||
|
Installation |
Mounted on poles or walls |
|||
Please deploy the device to make it power on in three months after received or store it under following circumstance:
l Temperature: -10°C to 35°C
l Humidity: 30%RH to 85% RH
Thermometer and hygrometer should be used to monitor, adjust the temperature and humidity.
eA380-123 WLAN CH1-CH10 is unavailable when LTE works at band 40
1.2 Antenna Specifications
Table 1-2 eA380s LTE antenna specifications
|
Item |
eA380-123 |
eA380–135 |
|
Band |
2300 to 2400 MHz (Band 40) 2570 to 2620 MHz (Band 38) 2496 to 2690 MHz (Band 41) 2500 to 2570 MHz (Band 7 UL) 2620 to 2690 MHz (Band 7 DL) |
3400 to 3600 MHz (Band 42) 3600 to 3800 MHz (Band 43) |
|
Gain |
12±1dBi |
13±1dBi |
|
Input impedance |
50 ohm |
|
|
SWR |
< 2 |
|
|
Polarization |
Dual cross polarization |
|
|
Radiation pattern |
Directional antenna |
|
Table 1-3 WLAN antenna specifications
|
Item |
Description |
|
Frequency |
2400 MHz ~ 2483 MHz |
|
Input impedance |
50 Ω |
|
Standing wave ratio |
< 3 |
|
efficiency |
>50% |
|
Gain |
2dBi |
|
Polarization |
Linear polarization |
1.3 Software specifications
Table 1-4 Software specifications
|
Item |
Description |
|
Gateway |
Router: The default routing address is 0.0.0.0. The default routing table items can be generated accordingly. |
|
Supports Address Resolution Protocol (ARP) |
|
|
Supports domain name service (DNS) |
|
|
Supports Internet Control Message Protocol (ICMP) |
|
|
l Supports Network Address Translation (NAT) and Network Address Port Translation (NAPT). l Supports fragment message identification for normal NAT l Supports NAT traverse |
|
|
DHCP server l The default DHCP server address ranges from 192.168.1.2 to 192.168.1.254. The default gateway address is 192.168.1.1. l The default DHCP lease is 24 hours. l The DHCP server can be enabled or disabled. l The DHCP server's address pool can be configured. l The DHCP lease can be configured. l IP address status such as the hostname, Media Access Control (MAC) address, IP address, and remaining DHCP lease can be displayed. l Supports static IP address reservation l Supports DHCP relay |
|
|
Routing behind MS UE direct connect |
|
|
Firewall |
l Firewall switch l LAN MAC address filtering l IP address filtering l URL filtering l Security Parameter Index (SIP) ALG l Demilitarized Zone (DMZ) l Port forwarding l Service access control l NAT（Network Address Translation） l Static Route l Dynamic Route |
|
LAN |
l Auto-negotiation between 10 /100 /1000 Mbit/s l MDI/MDIX auto-sensing l Compatible with IEEE 802.3/802.3u l If you connect to multiple hosts via Hub or switch, the number of host devices sold under LTE CPE should not exceed 32 |
|
frequency lock |
Support frequency, cell lock two ways |
|
WLAN |
SSID broadcast and hiding is supported. |
|
WLAN 2.4 GHz (802.11b/g/n) is supported. |
|
|
WPS is supported. |
|
|
Authentication: l Open System authentication l Shared Key authentication l 64/128-digit WEP encryption l 256-digit WPA-PSK/ WPA2-PSK encryption l AES ciphering algorithm TKIP and AES ciphering algorithm synchronously |
|
|
MAC address authentication: l Up to 10 MAC address items. l Support MAC address whitelist l Support MAC address blacklist |
|
|
Ratio adjustment: l Automatically l Manually |
|
|
STA management: l Supports limit of access users (up to 32 users) l Support STA status query |
|
|
Upgrade |
Supports TR-069 upgrade and local upgrade and online upgrade |
|
SIM |
Supports PIN management and SIM card authentication soft SIM |
|
Dial-up connection |
Supports automatic and manual connection |
|
Importing and exporting configuration |
Encrypt and back up the current configuration, and then restore from a backup configuration |
