Use ont-load Function

junchang · Created May 13, 2020 01:32:12

Dear firend,

I do not know if you started the load task.

you need to start the command with the command as follows:

huawei(diagnose)%%ont-load

{ info<K>|select<K>|start<K>|stop<K> }:start

{ <cr>|activemode<K> }:


  Command:     

       ont-load start

Hope it will be useful to you

Thanks

junchang · Created May 12, 2020 01:13:59

Dear firend,

First, it must be ensured that the OLT and FTP server can communicate normally. Can I ping the IP address of the same FTP server on the OLT device?

Thanks

junchang · Created May 13, 2020 01:32:12

Dear firend,

I do not know if you started the load task.

you need to start the command with the command as follows:

huawei(diagnose)%%ont-load

{ info<K>|select<K>|start<K>|stop<K> }:start

{ <cr>|activemode<K> }:


  Command:     

       ont-load start

Hope it will be useful to you

Thanks