This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Enterprise
Community Forums Switches
USB Base Deployment

USB Base Deployment

Created: Apr 27, 2019 19:17:12Latest reply: Apr 30, 2019 19:17:51 187 3 0 0
  Rewarded Hi-coins： 0 (problem resolved)
display all floors #1

Hi all

I accidentally erased the flash memory of S5720-28X-LI-AC. All the ports are shutdown so i cant upload new file through ftp server. But USB deployment is also not working. I have made .ini file as was instructed on huaweii page and mentioned below.

BEGIN LSW

[GLOBAL CONFIG]

TIMESN=20190421.020900

[DEVICE0 DESCRIPTION]

MAC=DEFAULT

AUTODELFILE=YES

DEVICETYPE=S5700-X-LI

SYSTEM-SOFTWARE=S5720LI-V200R010C00SPC600.CC

ENDLSW


Pl suggest the solution.

  • x
  • convention：

I have this problem too (0) Favorite(0) Share Report
Featured Answers
Admin Created Apr 27, 2019 20:18:34 Helpful(0) Helpful(0)

Hello!

I have two questions about your .ini file:

1.TIMESN - for example, if the index file was edited at 08:09:10 on June 28, 2011, you can set this field to TIMESN=20110628.080910. Your TIMESN is April 21, 2019. Each device to be upgraded has a TIMESN field. In a USB-based upgrade, a device sets the TIMESN field before it restarts (or after the upgrade is complete if the device does not need to restart). This TIMESN field cannot be used in The next upgrade. If the upgrade fails after the device restarts, you must change the TIMESN value before starting a USB-based upgrade again.

2. DEVICETYPE - your DEVICETYPE is S5700-X-LI, which does not match the USB deployment device S5720-28X-LI-AC you want to perform.
  • x
  • convention：
All Answers
DDSN Admin Created Apr 27, 2019 20:18:34 Helpful(0) Helpful(0)

Hello!

I have two questions about your .ini file:

1.TIMESN - for example, if the index file was edited at 08:09:10 on June 28, 2011, you can set this field to TIMESN=20110628.080910. Your TIMESN is April 21, 2019. Each device to be upgraded has a TIMESN field. In a USB-based upgrade, a device sets the TIMESN field before it restarts (or after the upgrade is complete if the device does not need to restart). This TIMESN field cannot be used in The next upgrade. If the upgrade fails after the device restarts, you must change the TIMESN value before starting a USB-based upgrade again.

2. DEVICETYPE - your DEVICETYPE is S5700-X-LI, which does not match the USB deployment device S5720-28X-LI-AC you want to perform.
  • x
  • convention：
chenhui Admin Created Apr 29, 2019 08:56:25 Helpful(0) Helpful(0)

@Alvi_Sb hi,
as DDSN said, please modify the index file, set the parameter to match your device, rather than copy the parameters from the documentation.
  • x
  • convention：
Alvi_Sb Created Apr 30, 2019 19:17:51 Helpful(0) Helpful(0)

Thanks for the support. The issue is resolved.
  • x
  • convention：
Back to list

Reply

Reply
Advanced
B Color Image Link Quote Code Smilies
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy Terms of Use
Huawei Enterprise Huawei Carrier Forum Training & Certification

Copyright © 2019 Huawei Technologies Co., Ltd. All rights reserved.

Fast reply Scroll to top