Hi
I would like to report an issue with URPF.
We tried to configure URPF on S6720-54C-EI-48S-AC(V200R010C00SPC600) port, but we received an error message:
<xx>dis cu int XG0/0/2
#
interface XGigabitEthernet0/0/2
undo portswitch
IP binding vpn-instance xx
IP address xx.xx.xx.xx 255.255.255.252
#
[xx-XGigabitEthernet0/0/2]urpf strict
Error: The port on this board works in route mode, so it does not support URPF strict mode.
We have checked limitations in the documentation but didn't find anything that matches this case.
Thank you for any advice.