UPS2000-G

Procedure

1. Setting the IP address on the UPS2000-G.

   1. Press  next to UPS2000-G screen.

   2. Press , select Settings.

   3. Press , input password.

      
      

      

      The preset password is 000001. To protect the access security, change the password after logging in to the coulometer for the first time.

      
      

   4. Press , select Communication card.

   5. Press  to enter the IP address setting.

   6. Press , set the value size by  and .

   7. Press  and move the cursor to Sub mask and Default GW, set Sub mask and Default GW by using the same as the preceding steps.

   8. Press ESC to exit.

2. Adding user and setting permissions on the Web of UPS2000-G.

   1. Enter the UPS2000-G IP address set in step1 on a PC browser, the PC IP address must be in the same network segment as the UPS2000-G IP address, press Enter.

   2. Input User Name and Password of UPS2000-G, click Login.

      
      

      

      The UPS2000-G preset user name is admin, and the password is Changeme. Change the password after you log in for the first time for the system security.

      
      

   3. Select Configure.

   4. Select SNMPv3 as SNMP version and enter 161 for SNMP port, as shown in Figure 6-41.

      
      

      Figure 6-41 Setting SNMP parameters
      
      

      
      

   5. Click Add in SNMP, as shown in Figure 6-42.

      
      

      Figure 6-42 Setting SNMP parameters_02
      
      

      
      

   6. Input the User Name, MD5 password, and DES password, set Permission to Write, and click Add.

      
      

      Record the User Name, MD5 password, and DES password for using when creating a UPS2000-G on the NetEco.

      

      You are advised to set MD5 Password and DES Password to different values.

      Figure 6-43 Setting SNMP parameters_03
      
      

      
      

   7. Click Add in SNMP Trap and Permission Settings.

      
      

      Figure 6-44 Setting SNMP parameters_04
      
      

      
      

   8. Input the NetEco server IP address in NMS addr, set Permission to Write, write 162 in Trap port, click Add.

      
      

      Figure 6-45 Setting SNMP parameters_05
      
      

      
      

   9. Click Submit.