1. Login to the WebLMT as usual, using below passwords:
Password is = hwbs@com
2-From the Top Panel choose FTP Tool and install it as below:
3.-After Installation, You will find FTP Server Folder in its specified directory during the installation; Install FTP Server Certificate as shown below:
4-Open the FTPServer.exe, You will notice that it will result in a green LED as shown in the task bar
You will be asked to change the default password for the FTP Server Tool in the 1st login time.
The default password is: hwbs@com
5-Double Click on the Green LED and change the encryption mode to be Plain Text and authenticate with FTP Password you have just modified.
6-On the LMT Run SET FTPSCLT and choose Plaintext to match the FTP Tool
7. On the LMT, Choose Device Maintenance Tab BTS Maintenance Data Configuration File Transfer.
8. To transfer the XML File from the site to the laptop, Follow the steps as shown below:
a. FTP Server IP: Your Laptop IP.
b. User Name: admin (FTP User Name).
c. Destination File Name: Installation Directory for FTP Tool on your laptop.
d. Password: Modified FTP Password in step 5.
e. Choose upload.
After the uploading is completed, you will find the XML file in the FTP Tool folder installed in step 3 as shown below:
9. To transfer the XML File from the laptop to the NodeB, follow the steps as shown below:
a. FTP Server IP: Your Laptop IP
b. User Name: admin (FTP User Name)
c. Destination File Name: save the XML File in the Installation Directory for FTP Tool on your laptop, then browse this directory from LMT as shown.
d. Password: Modified FTP Password in step 5.
e. Choose Download.
f. Make Data Configuration File take effect.
g. Reset immediately to reboot the WMPT/UMPT with the new configuration.
10-Run Command LST CFGFILE to verify that the download is done successfully by checking Parameter Modify Time:
