Uplink port ThresholdPercent more than 50 %

Created: Jun 9, 2018 08:11:26Latest reply: Dec 28, 2018 08:49:45 2128 6 0 0
  Rewarded Hi-coins: 0 (problem resolved)
This post was last edited by Jaideva at 2018-06-09 08:13. Hi,


My uplink port is suddenly down and if remove and reconnect the fiber path cable the port is coming up and if i check the log thershold precent showing more than 50%.


Pls help me to reslove the issue


Jun  9 2018 12:34:22 Hub %IFPDT/4/INT_INBRDR(l)[2]:The input rate change ratio exceeded the threshold.(IfIndex = 32, InterfaceName = XGigabitEthernet0/0/4, ThresholdPercent = 50%, CurrentStatisticalPeriodRate = 84781438, LastStatisticalPeriodRate = 357103712)
Jun  9 2018 12:34:16 Hub %IFPDT/4/IF_STATE(l)[3]:Interface XGigabitEthernet0/0/3 has turned into UP state.
Jun  9 2018 12:33:49 Hub %IFPDT/4/INT_OUTBRDR(l)[4]:The output rate change ratio exceeded the threshold.(IfIndex = 31, InterfaceName = XGigabitEthernet0/0/3, ThresholdPercent = 50%, CurrentStatisticalPeriodRate = 96973775, LastStatisticalPeriodRate = 332297159)
Jun  9 2018 12:30:58 Hub %IFPDT/4/IF_STATE(l)[5]:Interface XGigabitEthernet0/0/3 has turned into DOWN state.
  • x
  • convention:

Featured Answers
StarOfWest
Created Jun 18, 2018 08:00:03 Helpful(0) Helpful(0)

Hey there!

There might be a temporary burst of traffic before the traffic converges. 

It could be a normal behavior - it depends on your network characteristics. 

Are there any other logs captured? I'm wondering why the interface goes down :)
  • x
  • convention:

“We only get answers to the questions that we ask.” physicist Werner Heisenberg
All Answers
Barret
Barret Created Jun 15, 2018 07:32:27 Helpful(0) Helpful(0)

1. what's the device and what's version?
  • x
  • convention:

Barret
Barret Created Jun 15, 2018 07:33:18 Helpful(0) Helpful(0)

2. how do you configured this interface?
3. display interface xg0/0/3
  • x
  • convention:

Torrent
Torrent Created Jun 15, 2018 07:34:39 Helpful(0) Helpful(0)

Uplink port ThresholdPercent more than 50 %-2683527-1
  • x
  • convention:

Martian_superman
Martian_superman Created Jun 17, 2018 12:31:48 Helpful(0) Helpful(0)

we doubt there is a loop in your network, could you check the switch if there was mac-address flapping?

If you couldn't figure out this issue, you can contact Huawei TAC for help.
  • x
  • convention:

StarOfWest
StarOfWest Created Jun 18, 2018 08:00:03 Helpful(0) Helpful(0)

Hey there!

There might be a temporary burst of traffic before the traffic converges. 

It could be a normal behavior - it depends on your network characteristics. 

Are there any other logs captured? I'm wondering why the interface goes down :)
  • x
  • convention:

“We only get answers to the questions that we ask.” physicist Werner Heisenberg
4am
4am Created Dec 28, 2018 08:49:45 Helpful(0) Helpful(0)

I hope this problem has been solved
  • x
  • convention:

Comment

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login