Got it

Uplink port ThresholdPercent higher than 50%

Created: Jun 9, 2018 08:11:26Latest reply: Feb 8, 2021 08:06:38 5102 7 1 0 0
  Rewarded HiCoins: 0 (problem resolved)

Hi, everybody!


This post enquires about the issue of an uplink port ThresholdPercent higher than 50%. Please see more details below.


ISSUE DESCRIPTION


My uplink port is suddenly down and if Iremove and reconnect the fiber path cable, the port is coming back up If I check the log, ThresholdPercent is showing to be higher than 50%.

Please help me solve this uplink port ThresholdPercent higher than 50% issue.


Jun  9 2018 12:34:22 Hub %IFPDT/4/INT_INBRDR(l)[2]:The input rate change ratio exceeded the threshold.(IfIndex = 32, InterfaceName = XGigabitEthernet0/0/4, ThresholdPercent = 50%, CurrentStatisticalPeriodRate = 84781438, LastStatisticalPeriodRate = 357103712)
Jun  9 2018 12:34:16 Hub %IFPDT/4/IF_STATE(l)[3]:Interface XGigabitEthernet0/0/3 has turned into UP state.
Jun  9 2018 12:33:49 Hub %IFPDT/4/INT_OUTBRDR(l)[4]:The output rate change ratio exceeded the threshold.(IfIndex = 31, InterfaceName = XGigabitEthernet0/0/3, ThresholdPercent = 50%, CurrentStatisticalPeriodRate = 96973775, LastStatisticalPeriodRate = 332297159)
Jun  9 2018 12:30:58 Hub %IFPDT/4/IF_STATE(l)[5]:Interface XGigabitEthernet0/0/3 has turned into DOWN state.

Featured Answers

Recommended answer

StarOfWest
Created Jun 18, 2018 08:00:03

Hey there!

There might be a temporary burst of traffic before the traffic converges. 


It could be a normal behavior - it depends on your network characteristics. 

Are there any other logs captured? I'm wondering why the interface goes down :)
View more
  • x
  • convention:

All Answers
1. what's the device and what's version?
View more
  • x
  • convention:

2. how do you configured this interface?
3. display interface xg0/0/3
View more
  • x
  • convention:

Uplink port ThresholdPercent higher than 50%-2683527-1
View more
  • x
  • convention:

we doubt there is a loop in your network, could you check the switch if there was mac-address flapping?

If you couldn't figure out this issue, you can contact Huawei TAC for help.
View more
  • x
  • convention:

Hey there!

There might be a temporary burst of traffic before the traffic converges. 


It could be a normal behavior - it depends on your network characteristics. 

Are there any other logs captured? I'm wondering why the interface goes down :)
View more
  • x
  • convention:

I hope this problem has been solved
View more
  • x
  • convention:

any solution for this issue ?
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.