Update for the bios of Switch S5300

Created: Aug 14, 2019 01:00:46Latest reply: Aug 14, 2019 05:42:21 122 2 2 0
  Rewarded Hi-coins: 0 (problem resolved)

How to update the new bios for newest version of Swith?

  • x
  • convention:

Featured Answers
Peterhof
Created Aug 14, 2019 04:45:30 Helpful(0) Helpful(0)

  • x
  • convention:

I%20am%20an%20IT%20engineer%20in%20the%20State%20Museum%20Reserve%20Peterhof.%20My%20job%20is%20keeping%20alive%20our%20network%2C%20servers%20and%20storages%20solutions%20and%20also%20preparing%20for%20purchasing%20new%20equipment%20and%20server%20software.
All Answers
Peterhof
Peterhof Created Aug 14, 2019 04:45:30 Helpful(0) Helpful(0)

  • x
  • convention:

I%20am%20an%20IT%20engineer%20in%20the%20State%20Museum%20Reserve%20Peterhof.%20My%20job%20is%20keeping%20alive%20our%20network%2C%20servers%20and%20storages%20solutions%20and%20also%20preparing%20for%20purchasing%20new%20equipment%20and%20server%20software.
wissal
wissal MVE Created Aug 14, 2019 05:42:21 Helpful(0) Helpful(0)

Hi,

To update the new bios for newest version of Swith
  1. Run TFTP software on the PC and specify the path for storing the system software.

    imgDownload?uuid=14528b59ec5b4874a02cb53 NOTE:

    The device is not delivered with the TFTP server software; therefore, the customer needs to buy the TFTP server software and install it. The TFTPD32 program is recommended.

    Run the TFTP server program on the PC and configure the PC, as shown in Figure 2-2.

    Figure 2-2 Configuring the TFTP server 
    imgDownload?uuid=953f1a0ff2ac434e9a61675
    • Click Browse to set the directory for storing the new system software.
    • Enter the TFTP server address in Server Interface, for example, 192.168.1.11. Generally, this IP address is automatically set by the system.

  2. Log in to the device through the console port.
  3. Restart the device. Press Ctrl+B to enter the BIOS menu when the following information is displayed.

    Starting ...       
                 
    Press CTRL+B to enter BIOS menu:  1             //Press Ctrl+B within 3s to enter the BIOS menu. After 3s, the system continues to start up.
         
    Password:                                       //Enter the password of the BIOS menu.
            
            BIOS Menu (Version: 126)
    
         1. Continue to boot
         2. Update from serial interface
         3. Update from ethernet interface
         4. Modify startup parameters
         5. File system
         6. Modify BIOS password
         7. Modify console password
         8. Reboot
    
    Enter your choice(1-8): 
    imgDownload?uuid=14528b59ec5b4874a02cb53 NOTE:

    Enter the password to enter the BIOS menu. The initial password is Admin@huawei.com.

  4. Select choice 3 to enter the Ethernet interface submenu.

            BIOS Menu (Version: 126)
    
         1. Continue to boot
         2. Update from serial interface
         3. Update from ethernet interface              //Enter the Ethernet interface submenu to upgrade system software.
         4. Modify startup parameters
         5. File system                                 //Enter the file system submenu to view the file system content.
         6. Modify BIOS password
         7. Modify console password
         8. Reboot
    
    Enter your choice(1-8): 3
    
            Ethernet Submenu     
                                     
         1. Update CPLD
         2. Update system software                      //This operation does not affect files with names different from the downloaded file name. The downloaded file with the same name as the original one overwrites the original file.
         3. Update system software with disk format     //This operation formats the startup disk, so all data including the system software and configuration file in the startup disk will be lost. Exercise caution when you select 3.
         4. Modify parameters
         5. Return
    
    Enter your choice(1-5): 

  5. In the Ethernet interface submenu, select choice 2 to enter the system software upgrade menu and download the system software.

            Ethernet Submenu     
                                     
         1. Update CPLD
         2. Update system software
         3. Update system software with disk format
         4. Modify parameters
         5. Return
    
    Enter your choice(1-5): 2
    Please check network parameters:
    '.' = clear field;  '-' = go to previous field;  Ctrl+C = quit      
    Ftp type            : TFTP        //In V200R002C50 and later versions, files can be transferred using TFTP, FTP, or SFTP.
    Server IP address   :                  - 192.168.1.11     //Configure the server IP address.
    Switch IP address   :                  - 192.168.1.121    //Configure the device IP address.
    Gateway IP address  :                  -                    //Configure the gateway address. You do not need to configure the gateway address when the device and server are located on the same network segment.
    Network Mask        :                  - 255.255.255.0    //Configure the subnet mask.
    
    Please input file name: softwarenew.cc                    //Configure the name of the file to be downloaded.
    
    TFTP server IP address: 192.168.1.11                                                                                               
    Switch IP address: 192.168.1.121                                                                                                 
    Download Filename 'softwarenew.cc'.                                                                                
    Downloading:################################################################# 
    ......                                                            //The information displayed on the device is omitted.
    User interface con0 is available                                                                                                    
                                                                                                                                        
                                                                                                                                        
    Please Press ENTER.                                               //System software upgrade through BIOS is complete. Ensure that TFTP application is enabled before this step.

Verifying the Configuration

After the device starts up, run the display version and display startup commands to check whether the upgrade is successful.


Thanks

  • x
  • convention:

Telecommunications%20engineer%2C%20currently%20senior%20project%20manager%20at%20an%20operator%2C%20partner%20of%20Huawei%2C%20in%20the%20radio%20access%20network%20department%2C%20for%2020%20years%20I%20managed%20several%20types%20of%20projects%2C%20for%20the%20different%20nodes%20of%20the%20network.

Comment

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login