Unable to configure NTP service of OSN9800

Dear friend!

The NTP authentication of the NE must be the same as the standard NTP server. If the standard NTP server is configured with a key for authentication, the key of the NE must be the same as the key of the server.

1. Visit the following navigation path.

2. Select the NE to be added and click Add.

3. Set business parameters and click Apply.

Thanks!

Configuration Roadmap:

- Configuring IP addresses for SwitchA and SwitchB
- Configuring SwitchA as the master clock so that the local clock of SwitchA can be used as the reference clock
- Configuring SwitchB to synchronize time from SwitchA and configuring NTP authentication to ensure time synchronization security

Procedure:
1. Configure IP addresses for SwitchA and SwitchB.
# Configure the IP address for SwitchA.
2. Configure SwitchA as the master clock server and enable NTP authentication. Set the clock stratum to 1
3. Enable the NTP server function of SwitchA.
4. Configure SwitchB to synchronize time with SwitchA and enable NTP authentication. The IP address of NTP server is 10.10.1.1.

More details please visit link below:

https://support.huawei.com/enterprise/en/doc/EDOC1000039339/18b98c59/configuring-ntp-to-synchronize-time