Got it

Unable Log in to My Router HG630 Because of an Username & Password Problem

Created: Jul 30, 2019 22:58:08Latest reply: Jan 4, 2021 13:46:36 46737 31 0 0 0
  Rewarded HiCoins: 0 (problem resolved)

Hello, everyone!


This post addresses the issue of being unable log in to my router HG630 because of a username & password problem. Please see more details below.


Huawei HG630


Source: https://www.aliexpress.com/item/32556411695.html


ISSUE DESCRIPTION

I have a problem with a Huawei HG630 router.


I've upgraded the firmware HG630 V2-12 V100R001C105B020_Board Software_Egypt_Tedata_05022ATV.zip from this site:

https://easy-firmware.com/index.php?a=downloads&b=file&id=119050.


Everything has changed, including the username & password. Now I can not log in to the router with my previous username & password.


Error message:

Incorrect user name or password. Remaining attempts: 2.


I have contacted easy-firmware, but they do not know anything about the username & password!!


The router has been reset several times, but the previous username & password are still not working.


*Can I know the login data from firmware files?


*Can I reset my password via Telnet?


How is that, because I don't know anything?


Please help me, I cannot buy a new router at this time. I apologize for disturbing you.

Thanks.

Featured Answers

Recommended answer

umaryaqub
MVE Created Jul 31, 2019 01:03:12

Hi!

Have you tried using the hard reset? It will restore the factory default settings.

To perform a factory reset, please follow the below steps.

1. Power on the Huawei router, place a paper clip or pin into the hole on the back of the router labeled Reset.


2. Hold the paper clip or pin down for 10 to 15 seconds and release.

3. The Router will reboot on its own. Once the WLAN light stops blinking, the router is reset.

Please note:

Resetting the Huawei router does not reset the firmware to an earlier version. It will only change all settings back to factory defaults.

Once your Huawei router has been reset, it goes back to its factory default dettings.

IP address: 192.168.0.1 or 192.168.1.1

Username: admin

Password: admin or password

Alternatively, see back side of your device.
View more
  • x
  • convention:

MrClouds
MrClouds Created Jul 31, 2019 02:12:49 (0) (0)
Already tried it
Settings reset more than once
This was also tested
https://setuprouter.com/router/huawei/passwords.htm
The router data entry was tried behind of device
Nothing worked
Thank you for trying to help me  
umaryaqub
umaryaqub Reply MrClouds  Created Jul 31, 2019 04:25:18 (0) (0)
Do you have backup for this router firmware or do you have any service contract with Huawei for the router?  
MrClouds
MrClouds Reply umaryaqub  Created Jul 31, 2019 13:07:07 (0) (0)
I apologize for my late reply, I didn't see the message,
I have a full firmware file
This is a photo
https://i.imgur.com/tv5w097.png
https://i.imgur.com/s6d7lp3.png  
All Answers

Hi!

Have you tried using the hard reset? It will restore the factory default settings.

To perform a factory reset, please follow the below steps.

1. Power on the Huawei router, place a paper clip or pin into the hole on the back of the router labeled Reset.


2. Hold the paper clip or pin down for 10 to 15 seconds and release.

3. The Router will reboot on its own. Once the WLAN light stops blinking, the router is reset.

Please note:

Resetting the Huawei router does not reset the firmware to an earlier version. It will only change all settings back to factory defaults.

Once your Huawei router has been reset, it goes back to its factory default dettings.

IP address: 192.168.0.1 or 192.168.1.1

Username: admin

Password: admin or password

Alternatively, see back side of your device.
View more
  • x
  • convention:

MrClouds
MrClouds Created Jul 31, 2019 02:12:49 (0) (0)
Already tried it
Settings reset more than once
This was also tested
https://setuprouter.com/router/huawei/passwords.htm
The router data entry was tried behind of device
Nothing worked
Thank you for trying to help me  
umaryaqub
umaryaqub Reply MrClouds  Created Jul 31, 2019 04:25:18 (0) (0)
Do you have backup for this router firmware or do you have any service contract with Huawei for the router?  
MrClouds
MrClouds Reply umaryaqub  Created Jul 31, 2019 13:07:07 (0) (0)
I apologize for my late reply, I didn't see the message,
I have a full firmware file
This is a photo
https://i.imgur.com/tv5w097.png
https://i.imgur.com/s6d7lp3.png  
delete
View more
  • x
  • convention:

user_3869207
user_3869207 Created Jun 21, 2020 07:20:29 (0) (0)
Iam also facing same problem.  

Hello, from the firmware name you upgraded, it belongs to the firmware of the operating agreed version. I do not know whether your device is customized. If you want to find the password, contact the operator in Egypt.

 

In addition, the firmware version of the ONT must match the firmware version of the peer OLT. Otherwise, the ONT may work abnormally. You are advised not to upgrade the firmware at will, risky operations must be performed under the guidance of professional technical engineers.

View more
  • x
  • convention:

MrClouds
MrClouds Created Jul 31, 2019 03:35:44 (0) (0)
Sir, Router continued to an Internet company in Egypt,
Connected company sent me an external technician and installed the firmware at him, our Internet company will not fix this
Can you help me reset my password?
Sir I will not be able to buy a new router at this time
I hope you help me, I do not have another solution.  
MrClouds
MrClouds Created Jul 31, 2019 03:37:23 (0) (0)
sorry for disturbing  
liqiang185
liqiang185 Reply MrClouds  Created Jul 31, 2019 06:00:25 (0) (0)
Who did you get the new firmware from?
Just find him to give you the password.  
user_3385159
user_3385159 Reply liqiang185  Created Jul 31, 2019 06:20:46 (0) (0)
Try this user name: root , password: password  
MrClouds
MrClouds Reply user_3385159  Created Jul 31, 2019 11:43:41 (0) (0)
Nothing works  
MrClouds
MrClouds Reply liqiang185  Created Jul 31, 2019 11:44:03 (0) (0)
Unfortunately I'm the one who gave the software to the technician to install
Purchased from easy-firmware
Communicate with easy-firmware
But they do not know anything about Username & Password !!
Can I reset my password via Telnet
How is that because I do not know anything  
MrClouds
MrClouds Reply liqiang185  Created Jul 31, 2019 13:10:06 (0) (0)
Please see these pictures
https://i.imgur.com/tv5w097.png

https://i.imgur.com/s6d7lp3.png  
Please help me @umaryaqub @liqiang185 
View more
  • x
  • convention:

Please do not ignore me,
If there is no solution just let me know
Please help @liqiang185 @umaryaqub
View more
  • x
  • convention:

Posted by MrClouds at 2019-08-01 00:24 Please do not ignore me,If there is no solution just let me knowPlease help @liqiang185 @umaryaqub
Just a moment, please. I'll ask the others for you
View more
  • x
  • convention:

Can you use PC ping HG630?

 Is the network port indicator on your PC on?

 

View more
  • x
  • convention:

MrClouds
MrClouds Created Aug 1, 2019 00:59:47 (0) (0)
Thanks for your response
Yes I can
https://i.imgur.com/pq4qGgM.png  
Username
Password
•••••

You have failed 3 times. Please try again in a minute.
How do I find the default login password?
Forgot password?
Restore the default login password
If you forgot the login password, press and hold the Reset button for about 6 seconds to restore your device to its factory settings. You will then be able to log in using the default login password. You can find the default login password in the device Quick Start.
Attention: All customized settings will be lost after you restore the device to its factory settings.
Log in
Status Information
Internet status: Internet is unavailable
Connected WLAN devices: 1
WLAN 2.4 GHz frequency band: ON
SSID: HomeBroadband
Connected Ethernet devices: 0
USB storage devices: 0
Hardware version: VER.A
Software version: V100R001C163B013
not login fali
View more
  • x
  • convention:

Username
Password
•••••

You have failed 3 times. Please try again in a minute.
How do I find the default login password?
Forgot password?
Restore the default login password
If you forgot the login password, press and hold the Reset button for about 6 seconds to restore your device to its factory settings. You will then be able to log in using the default login password. You can find the default login password in the device Quick Start.
Attention: All customized settings will be lost after you restore the device to its factory settings.
Log in
Status Information
Internet status: Internet is unavailable
Connected WLAN devices: 1
WLAN 2.4 GHz frequency band: ON
SSID: HomeBroadband
Connected Ethernet devices: 0
USB storage devices: 0
Hardware version: VER.A
Software version: V100R001C163B013
not open log in my account forgetUnable Log in to My Router HG630 Because of an Username & Password Problem-3190118-1
View more
  • x
  • convention:

12
Back to list

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.