Got it

UA5000 V5 TO H248 PROTCOL CONVERSION FOR THE SAME NODE

Created: Dec 8, 2021 16:06:48Latest reply: Dec 10, 2021 18:32:31 230 5 1 0 0
  HiCoins as reward: 0 (problem unresolved)

How do we convert- UA5000 from V5 to H248 protocol to electrical connection. Currently the control card is 1 PVMB. 

step by step procedure will be aprreciated. this is how I plan to do it, any correction or better way willl be apriciated


UA5000(config)# working mode integrated

UA5000(config)#undo hdlc

UA5000(interface-eth)#ip address 192.168.175.6 255.255.255.252 192.168.175.5 vlan_tag 280 SIGNAL

UA5000(interface-eth)#ip address 192.168.174.10 255.255.255.252 192.168.174.10 vlan_tag 370 MEDIA

UA5000(interface-eth)#ip modify 192.168.1.4 ip_address 192.168.176.10 submask 255.255.255.224  gateway 192.168.176.9  vlan_tag 270 NMS

UA5000(config) working mode integrated


UA5000(config)# interface h248 1

UA5000(config-if-h248-1)#  if-h248 attribute mgip 192.168.175.6 mgport 2944 mgcip_1 192.168.100.4 mgcport_1 2944 mgcip_2 192.168.201.4 mgcport_2 2944 code text transfer udp mg-media-ip 192.168.174.10

UA5000(config-if-h248-1)mg-ringmode add 1 129 145

UA5000(config-if-h248-1)tidformat rtp Template 1 PRefix RTP/

UA5000(config-if-mg-1)#reset coldstart




Featured Answers

Recommended answer

Chenxintao
Admin Created Dec 10, 2021 00:13:58

Hello, friend!


According to your configuration requirements, you need to modify the configuration on both the UA500 and the SoftSwitch.


To modify the configuration on the UA5000, you need to refer to the following link:


Introduction to the VoIP Service


Configuration Example of the VoIP Service


Configuration Example of the VoIP Service (in Integrated Upstream Mode)


Thanks!


View more
  • x
  • convention:

hpl_Panda
hpl_Panda Created Dec 12, 2021 06:14:54 (0) (0)
good  
All Answers
Thanks for contacting the Huawei community!

We are checking your question and will provide an answer to you shortly...
View more
  • x
  • convention:

hpl_Panda
hpl_Panda Created Dec 12, 2021 06:15:05 (0) (0)
ok  

Hello, friend!


According to your configuration requirements, you need to modify the configuration on both the UA500 and the SoftSwitch.


To modify the configuration on the UA5000, you need to refer to the following link:


Introduction to the VoIP Service


Configuration Example of the VoIP Service


Configuration Example of the VoIP Service (in Integrated Upstream Mode)


Thanks!


View more
  • x
  • convention:

hpl_Panda
hpl_Panda Created Dec 12, 2021 06:14:54 (0) (0)
good  

Thanks a lot, the document was helpful , I was able to check and executed the commands. It converted successfully.

View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.