TX power problem

Thomas_Tan · Created Dec 30, 2021 09:55:15

Hello, friend!

Based on your question, there are 6 possibilities for this:

1. Other alarms occur at the opposite station.

2. The transmit power of the opposite station is very low.

3. The local ODU is faulty.

4. Signal attenuation on the radio link is very heavy.

5. The transmit and receive frequencies of the local ODU and the peer ODU do not match.

6. The received power of the ODU is inconsistent in the horizontal polarization direction of the antenna and in the vertical polarization direction.

You can check for these possibilities. For more information, click: Operation Method

If the problem persists, you can contact Huawei's global service hotline for help. For contact details, please click: Global Service Hotline

gzzz · Created Dec 29, 2021 10:42:28

Hello, dear!

It's nice to meet you in the community.

We're working on your problem. Just a moment, please.

Thomas_Tan · Created Dec 29, 2021 11:09:03

Hello, friend!

Please describe your equipment in detail. Parameters of different devices are different.

Thomas_Tan · Created Dec 29, 2021 11:35:44

Hello, may I ask if there is an alarm on the equipment?

Because I saw that the upper right corner of the picture you sent said that there was no contact with the peer end.

Thomas_Tan · Created Dec 30, 2021 09:55:15

Hello, friend!

Based on your question, there are 6 possibilities for this:

1. Other alarms occur at the opposite station.

2. The transmit power of the opposite station is very low.

3. The local ODU is faulty.

4. Signal attenuation on the radio link is very heavy.

5. The transmit and receive frequencies of the local ODU and the peer ODU do not match.

6. The received power of the ODU is inconsistent in the horizontal polarization direction of the antenna and in the vertical polarization direction.

You can check for these possibilities. For more information, click: Operation Method

If the problem persists, you can contact Huawei's global service hotline for help. For contact details, please click: Global Service Hotline

Mohamed_Ahmed · Created Dec 30, 2021 19:27:50

Dear
The root cause is that this ODU maximum transmitted power is 10.7 according to modulation
so if you need to increase power you must change modulation

Saqib123 · Created Jan 1, 2022 17:18:03

Issue resolved
Thank You

TX power problem

Recommended answer

Third Party’s Trade Secret

`@trans`bright_future`~trans`

My Followers

Enterprise

Consumer

Corporate

Carriers

TX power problem

Recommended answer

Third Party’s Trade Secret

`@trans`bright_future`~trans`

My Followers