This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Enterprise
Community Forums Switches
Two methods of vlan isola...

Two methods of vlan isolation in enterprises

Latest reply: Jan 3, 2019 16:56:56 1343 5 11 0
display all floors #1
An enterprise office area is divided into four parts, and vlan is divided on the company switch.


140307xxj7rjj582rs82a2.png


Isolation configuration method:
1. You can configure the isolation of each office area by configuring port isolation on the switch SWA.
2. In the above figure, Mux VLAN can be configured to realize mutual communication or isolation between users.



This post was last edited by 4am at 2018-12-27 06:06.
  • x
  • convention：

Helpful (11) Favorite(0) Share Report
liwaye
Created Dec 27, 2018 07:05:18 Helpful(0) Helpful(0)

can you add any config script in your post ? maybe in this way its more understandable anyway thanks for sharing
  • x
  • convention：
user_2915719
Created Dec 27, 2018 07:44:16 Helpful(0) Helpful(0)

This is a good case for the usage of MUX VLAN. The MUX VLAN function is used to control network resources based on VLANs, and it also provides Layer 2 isolation to allow enterprise employees to communicate and isolate customers.
  • x
  • convention：
yiyi0519
Created Dec 27, 2018 07:48:03 Helpful(0) Helpful(0)

VLAN is a relatively new technology, working in Layer 2 and Layer 3 of the OSI reference model. A VLAN is a broadcast domain, and communication between VLANs is done through a Layer 3 router. Compared with traditional LAN technology, VLAN technology is more flexible. It has the following advantages: Reduced management overhead for moving, adding, and modifying network devices; can control broadcast activities; and improve network security.
  • x
  • convention：
MHME
Created Jan 3, 2019 07:50:28 Helpful(0) Helpful(0)

Configuration Roadmap

The configuration roadmap is as follows:

1. Configure the principal VLAN and a VLANIF interface. The IP address of the VLANIF interface is used as the gateway IP address for downstream hosts and servers.

2. Configure the group VLAN.

3. Configure the separate VLAN.

4. Add interfaces to VLANs and enable the MUX VLAN function on the interfaces.

5. Add interfaces of access switches to VLANs.
  • x
  • convention：
semphis
Created Jan 3, 2019 16:56:56 Helpful(0) Helpful(0)

what is the best feature to isolate clients in an ISP area? MUX-Vlan doesn't support multiple VLAN's
  • x
  • convention：
Back to list

Comment

Reply
Advanced
B Color Image Link Quote Code Smilies
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy Terms of Use
Huawei Enterprise Huawei Carrier Forum Training & Certification

Copyright © 2019 Huawei Technologies Co., Ltd. All rights reserved.

APP