Got it

Transceiver TX/RX power range for 100GBASE transceiver

Created: Mar 24, 2020 12:36:16Latest reply: Mar 24, 2020 12:53:17 446 1 0 0 0
  Rewarded HiCoins: 0 (problem resolved)

Hi, The optical power range for 100GBASE transcievers described in guides is as below:

Transmit power (dBm)  -4.3 to+4.5

Receive power (dBm)   -8.6 to 4.5

Are these ranges for each lane or for total power?

And what is the correct power range limits for that kind of transceivers (lane and total power)?

Thanks for your suggestions.

  • x
  • convention:

Featured Answers
chenhui
Admin Created Mar 24, 2020 12:53:17

Hi @user_3445655,

It’s limit just for one lane.

The power range here refers to a single lane. Check whether the optical module power is normal. You only need to check whether the power of each channel is within the threshold.

You can find the detailed value through command display interface transceiver, as the output below shows:


<HUAWEI> display interface 100ge 1/0/1 transceiver verbose

 100GE1/0/1 transceiver information:

~~~~~~~~

-------------------------------------------------------------------

 Diagnostic information:

   Temperature (Celsius)                 :48.47

   Voltage (V)                                 :3.40

   Bias Current (mA)                     :6.47|6.47    (Lane0|Lane1)

                                                      6.47|6.34    (Lane2|Lane3)

   Bias High Threshold (mA)              :12.00

   Bias Low Threshold (mA)               :0.00

   Current RX Power (dBm)                : -3.42|-3.77  (Lane0|Lane1)

                                                                -3.70|-2.98  (Lane2|Lane3)

   Default RX Power High Threshold (dBm) :2.00

   Default RX Power Low Threshold (dBm)  :-12.50

   Current TX Power (dBm)                : -2.53|-2.53  (Lane0|Lane1)

                                                               -2.53|-2.63  (Lane2|Lane3)

   Default TX Power High Threshold (dBm) :2.00

   Default TX Power Low Threshold (dBm)  :-10.60

-------------------------------------------------------------------


View more
  • x
  • convention:

All Answers
chenhui
chenhui Admin Created Mar 24, 2020 12:53:17

Hi @user_3445655,

It’s limit just for one lane.

The power range here refers to a single lane. Check whether the optical module power is normal. You only need to check whether the power of each channel is within the threshold.

You can find the detailed value through command display interface transceiver, as the output below shows:


<HUAWEI> display interface 100ge 1/0/1 transceiver verbose

 100GE1/0/1 transceiver information:

~~~~~~~~

-------------------------------------------------------------------

 Diagnostic information:

   Temperature (Celsius)                 :48.47

   Voltage (V)                                 :3.40

   Bias Current (mA)                     :6.47|6.47    (Lane0|Lane1)

                                                      6.47|6.34    (Lane2|Lane3)

   Bias High Threshold (mA)              :12.00

   Bias Low Threshold (mA)               :0.00

   Current RX Power (dBm)                : -3.42|-3.77  (Lane0|Lane1)

                                                                -3.70|-2.98  (Lane2|Lane3)

   Default RX Power High Threshold (dBm) :2.00

   Default RX Power Low Threshold (dBm)  :-12.50

   Current TX Power (dBm)                : -2.53|-2.53  (Lane0|Lane1)

                                                               -2.53|-2.63  (Lane2|Lane3)

   Default TX Power High Threshold (dBm) :2.00

   Default TX Power Low Threshold (dBm)  :-10.60

-------------------------------------------------------------------


View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.