HUND2 board is a 2x10G smart line card, which can be used as a STM-16 TDM service line board, or a GE/10GE service line board, or transmit them combinedly no more than 10Gbits/s rate in one port.
This board need to be mapped into STM-16/GE/10GE virtual interface before using. While trying to map a virtual port, the NMS pop up such an error.
Seems it needs license to finish that.
It was found this functions is a resource controlled license item in iManager OminiSight-T license, which is a part of U2000 NMS license. The needed license items can be:
LNSDEVLCT16 Smart 10G interface license (per port)
LNSDEVLCT04 Improves service transmission capability per 10Gbit/s(Per Unit)
Either one of these 2 items would make it work.
Choose Configuration > NE Batch Configuration > NE License Authorization from the main menu. Then configure license authorization.
After assign the license to NE in U2000, the mapping process can be done without error.
