Got it

To quickly obtain information about the AC from which an STA goes online, the online status of all ACs in the roaming group and STAs must be saved on

Created: Jan 19, 2022 08:23:27Latest reply: Jan 19, 2022 12:44:05 112 3 0 0 0
  Rewarded HiCoins: 0 (problem resolved)

To quickly obtain information about the AC from which an STA goes online, the online status of all ACs in the roaming

group and STAs must be saved on each AC.


Featured Answers
tubaboraka
MVE Author Created Jan 19, 2022 08:41:06

False



Checking Whether the STA Goes Online Successfully

Check information on the AC.

  1. Check whether the STA passes authentication.

    [AC6605-diagnose] display access-user                                            
      ------------------------------------------------------------------------------ 
      UserID Username                IP address       MAC            Status            
      ------------------------------------------------------------------------------ 
      17     80717a9589fb            192.168.11.254 8071-7a95-89fb Open              
      ------------------------------------------------------------------------------
  2. Check whether STA connection is normal.

    [AC6605-wlan-view] display station sta-mac 8071-7a95-89fb  
     ------------------------------------------------------------------------------  
     Station MAC-address                       : 8071-7a95-89fb  
     Station IP-address                        : 192.168.11.254  
     Station gateway                           : 192.168.10.1  
     Associated SSID                           : huawei@wlan  
     Station online time(ddd:hh:mm:ss)         : 000:00:11:20  
     The upstream SNR(dB)                      : 57.0  
     The upstream aggregate receive power(dBm) : -44.0  
     Station connect rate(Mbps)                : 64  
     Station connect channel                   : 1  
     Station inactivity time(ddd:hh:mm:ss)     : 000:00:00:00  
     Station current state  
     Authorized for data transfer            : YES  
     QoS enabled                             : YES  
     ERP enabled                             : YES  
     HT rates enabled                        : YES  
     Power save mode enabled                 : YES  
     Auth reference held                     : No  
     UAPSD enabled                           : No  
     UAPSD triggerable                       : No  
     UAPSD SP in progress                    : No  
     This is an ATH node                     : No  
     WDS workaround req                      : No  
     WDS link                                : No  
     PMF negotiation                         : No  
     Station's HT capability                   : Q  
     Station ERP element                       : 0  
     Station capabilities                      : ESs  
     Station PMF capabilities                  : PMFC=0,PMFR=0  
     Station's RSSI(dBm)                       : -44  
     Station's Noise(dBm)                      : -101  
     Station's radio mode                      : 11n  
     Station's AP Name                         : 8038-bc1b-8820  
     Station's Radio ID                        : 0  
     Station's Authentication Method           : Open  
     Station's Cipher Type                     : NO CIPHER  
     Station's User Name                       : 80717a9589fb  
     Station's Vlan ID                         : 100  
     Station's Channel Band-width              : 20MHz  
     Station's asso BSSID                      : 8038-bc1b-8820  
     Station's state                           : Asso with auth  
     Station's QoS Mode                        : WMM  
     Station's HT Mode                         : HT20  
     Station's MCS value                       : 7  
     Station's Short GI                        : nonsupport  
     Station's roam state                      : No  
     Station supported band                    : -  
     Station support 802.11k                   : No  
     Station support 802.11v                   : No  
     Available to trigger roam                 : Yes  
     Is sticky client now                      : No  
     Trigger aimless roam while sticky         : Yes  
     Neighbor AP number                        : 0  
     Neighbor list:  
     ------------------------------------------  
     AP name             RfID  SNR     RCPI  
     ------------------------------------------  
     ------------------------------------------  
     U-APSD list:  
     -------------------------------------------------------  
     AC-VI          AC-VO        AC-BE         AC-BK  
     -------------------------------------------------------  
     not-support  not-support  not-support  not-support  
     -------------------------------------------------------  
     ------------------------------------------------------------------------------
  3. Collect data entries of the STA on the AC.

    [AC6605-diagnose] display wlan wsta display sta-data by-mac 148f-c661-b424
    download?uuid=3691ff93f3e148b1b4c1880340718f71

    Entries can be queried on the AC only when the STA is accessing the network or after the STA accesses the network.

Collect trace information on the AC and AP.

download?uuid=3691ff93f3e148b1b4c1880340718f71

Trace information is collected by simulating the live network in the lab, not including historical online and offline records.

  • On the AC

  1. Collect trace information.

    [AC6605] trace enable  [AC6605] trace object mac-address 148f-c661-b424  //148f-c661-b424 is the STA's MAC address.
    [AC6605] display trace object  
     Trace Object:  
     ------------------------------------------------------------  
     Object ID      : 0  
     Slot           : -  
     MAC Address    : 148f-c661-b424  
     ………………  
     Output         : command line ( User-Intf 129 )  
     
     ------------------------------------------------------------
  2. Disable the service diagnosis function after the information is collected.

    [AC6605] undo trace enable[AC6605] undo trace object mac-address 148f-c661-b424

On the AP

  1. Collect trace information.

    <ap-1> terminal debugging<ap-1> terminal monitor<ap-1> system-view[ap-1] diagnose[ap-1-diagnose] station-trace probe station 148f-c661-b424[ap-1-diagnose] station-trace assoc station 148f-c661-b424
  2. Disable the service diagnosis function after the information is collected.

    <ap-1> undo terminal debugging<ap-1> undo terminal monitor<ap-1> system-view[ap-1] diagnose[ap-1-diagnose] undo station-trace probe station 148f-c661-b424[ap-1-diagnose] undo station-trace assoc station 148f-c661-b424

View more
  • x
  • convention:

Recommended answer

fuzi_yao
Admin Created Jan 19, 2022 08:25:46

Hi, friend!

The answer is False!

View more
  • x
  • convention:

All Answers

Hi, friend!

The answer is False!

View more
  • x
  • convention:

tubaboraka
tubaboraka MVE Author Created Jan 19, 2022 08:41:06

False



Checking Whether the STA Goes Online Successfully

Check information on the AC.

  1. Check whether the STA passes authentication.

    [AC6605-diagnose] display access-user                                            
      ------------------------------------------------------------------------------ 
      UserID Username                IP address       MAC            Status            
      ------------------------------------------------------------------------------ 
      17     80717a9589fb            192.168.11.254 8071-7a95-89fb Open              
      ------------------------------------------------------------------------------
  2. Check whether STA connection is normal.

    [AC6605-wlan-view] display station sta-mac 8071-7a95-89fb  
     ------------------------------------------------------------------------------  
     Station MAC-address                       : 8071-7a95-89fb  
     Station IP-address                        : 192.168.11.254  
     Station gateway                           : 192.168.10.1  
     Associated SSID                           : huawei@wlan  
     Station online time(ddd:hh:mm:ss)         : 000:00:11:20  
     The upstream SNR(dB)                      : 57.0  
     The upstream aggregate receive power(dBm) : -44.0  
     Station connect rate(Mbps)                : 64  
     Station connect channel                   : 1  
     Station inactivity time(ddd:hh:mm:ss)     : 000:00:00:00  
     Station current state  
     Authorized for data transfer            : YES  
     QoS enabled                             : YES  
     ERP enabled                             : YES  
     HT rates enabled                        : YES  
     Power save mode enabled                 : YES  
     Auth reference held                     : No  
     UAPSD enabled                           : No  
     UAPSD triggerable                       : No  
     UAPSD SP in progress                    : No  
     This is an ATH node                     : No  
     WDS workaround req                      : No  
     WDS link                                : No  
     PMF negotiation                         : No  
     Station's HT capability                   : Q  
     Station ERP element                       : 0  
     Station capabilities                      : ESs  
     Station PMF capabilities                  : PMFC=0,PMFR=0  
     Station's RSSI(dBm)                       : -44  
     Station's Noise(dBm)                      : -101  
     Station's radio mode                      : 11n  
     Station's AP Name                         : 8038-bc1b-8820  
     Station's Radio ID                        : 0  
     Station's Authentication Method           : Open  
     Station's Cipher Type                     : NO CIPHER  
     Station's User Name                       : 80717a9589fb  
     Station's Vlan ID                         : 100  
     Station's Channel Band-width              : 20MHz  
     Station's asso BSSID                      : 8038-bc1b-8820  
     Station's state                           : Asso with auth  
     Station's QoS Mode                        : WMM  
     Station's HT Mode                         : HT20  
     Station's MCS value                       : 7  
     Station's Short GI                        : nonsupport  
     Station's roam state                      : No  
     Station supported band                    : -  
     Station support 802.11k                   : No  
     Station support 802.11v                   : No  
     Available to trigger roam                 : Yes  
     Is sticky client now                      : No  
     Trigger aimless roam while sticky         : Yes  
     Neighbor AP number                        : 0  
     Neighbor list:  
     ------------------------------------------  
     AP name             RfID  SNR     RCPI  
     ------------------------------------------  
     ------------------------------------------  
     U-APSD list:  
     -------------------------------------------------------  
     AC-VI          AC-VO        AC-BE         AC-BK  
     -------------------------------------------------------  
     not-support  not-support  not-support  not-support  
     -------------------------------------------------------  
     ------------------------------------------------------------------------------
  3. Collect data entries of the STA on the AC.

    [AC6605-diagnose] display wlan wsta display sta-data by-mac 148f-c661-b424
    download?uuid=3691ff93f3e148b1b4c1880340718f71

    Entries can be queried on the AC only when the STA is accessing the network or after the STA accesses the network.

Collect trace information on the AC and AP.

download?uuid=3691ff93f3e148b1b4c1880340718f71

Trace information is collected by simulating the live network in the lab, not including historical online and offline records.

  • On the AC

  1. Collect trace information.

    [AC6605] trace enable  [AC6605] trace object mac-address 148f-c661-b424  //148f-c661-b424 is the STA's MAC address.
    [AC6605] display trace object  
     Trace Object:  
     ------------------------------------------------------------  
     Object ID      : 0  
     Slot           : -  
     MAC Address    : 148f-c661-b424  
     ………………  
     Output         : command line ( User-Intf 129 )  
     
     ------------------------------------------------------------
  2. Disable the service diagnosis function after the information is collected.

    [AC6605] undo trace enable[AC6605] undo trace object mac-address 148f-c661-b424

On the AP

  1. Collect trace information.

    <ap-1> terminal debugging<ap-1> terminal monitor<ap-1> system-view[ap-1] diagnose[ap-1-diagnose] station-trace probe station 148f-c661-b424[ap-1-diagnose] station-trace assoc station 148f-c661-b424
  2. Disable the service diagnosis function after the information is collected.

    <ap-1> undo terminal debugging<ap-1> undo terminal monitor<ap-1> system-view[ap-1] diagnose[ap-1-diagnose] undo station-trace probe station 148f-c661-b424[ap-1-diagnose] undo station-trace assoc station 148f-c661-b424

View more
  • x
  • convention:

faysalji
faysalji Author Created Jan 19, 2022 12:44:05

The answer is False!
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.