Time Problem on Switch Huawei S9306E

Hello @lucian2003

Did you try to set the Time Zone. If not try the command below according to your time zone

<Huawei> clock timezone Eastern_Time minus 05:00:00

Refer to:

clock timezone

Hi lucian2003,
Please check whether the switch is configured with the DST. If the switch is configured with the DST and the configured time is within the DST range, the time displayed by the display clock command will be added the DST offset.

Hi friend hope it can help u:

Configure the system date and time of switch:

Run the clock datetime [ utc ] HH:MM:SS YYYY-MM-DD command in the user view to configure the current date and time of a switch.

# Set the current date and time of a switch to 2015-12-31 16:00.

clock datetime 0:0:0 2016-01-01

Note:
If the scheduled restart function is configured in the user view using the schedule reboot { at time | delay interval [ force ] } command, and the system time is set to be over 10 minutes later than the scheduled restart time, the scheduled restart function becomes ineffective. For example, if the scheduled restart time is 2015-12-31 16:00 and the system time is changed to 2015-12-31 16:00, the scheduled restart function becomes ineffective.

https://forum.huawei.com/enterprise/en/corpus-5889.html

Just save the cofiguration. Then it be at its state