I have Huawei Access Point AP3050DN and AP8030DN. This device has been installed and configured while checking the throughput exchanging the data from one laptop to another only get 1-2Mbit/s. The configure is basic and the signal strength is -54 to -55 dBm. But as per the specs. it should get normally upto 450-800Mbits/sec.
So can anyone guide me what was the reason behind not getting proper throughput is there any way to boost or any documents which are tested on the real scenario.
Appreciate for early response.
with regards,
Anil Gurung
From group: Enterprise Support Group
