External CFU function not worked

[Copy the link]
Released on : 2018-5-10 16:27:35   Latest reply:2018-07-26 21:23:11
911 16
zaytdinovaee    

  Hi, I have a problem with CFU function on U1960 SIP subscriber

CFU function on local subscriber (internal number 8010) to national mobile number was implemented
successfully from LMT or WEB management interfaces.
There are no call restriction limits on 8010 number and on national prefix 0*, because I can success called on my CFU mobile number from this 8010 number directly.

(subscriber type - Advanced, Outgoing call right - IntraOf&Local&Nat, 0 prefix 0-11 numbers long - national toll call type)

CFU function from local 8005 to 8010 -CFU- external mobile number worked OK.
CFU function from external XXXXXX to 8010 -CFU-external mobile number NOT worked with announcement 1) ¨CFU is proceeding¨ 2) ¨sorry, you are not allowed to make this call. Please contact your system administrator for assistance¨. Have I some subscriber config error ? This post was last edited by zaytdinovaee at 2018-5-10 16:31.
  • x
  • convention:

Comment Reply

Go to the specified floor
KarimUC  Adept   Released on 2018-5-10 17:52:57 Helpful(0) Helpful(0)

Please share screen shot from the local prefix and outgoing rights for 8010 user along with call forward settings
  • x
  • convention:

Comment Reply

AalyY  Adept   Released on 2018-5-11 02:54:24 Helpful(0) Helpful(0)

1:- show softargu configinfor id 443 (the default value is 0) , try change to 1 using command onfig softargu type 443 value 1(if not working after change return back to default)
2:- make sure user you configure CFU the outgoing call rights is including Mobile rights.
using command config modify subscriber dn 8010 (and scroll down till parameter outgoing call rights then add mobile rights as below

This article contains more resources

You need to log in to download or view. No account?Register

x
  • x
  • convention:

Comment Reply

AalyY
AalyY  Adept   Released on 2018-5-11 02:56:52 Helpful(0) Helpful(0)

1:- show softargu configinfor id 443 (the default value is 0) , try change to 1 using command config softargu type 443 value 1(if not working after change return back to default)
2:- make sure user you configure CFU the outgoing call rights is including Mobile rights.
using command config modify subscriber dn 8010 (and scroll down till parameter outgoing call rights then add mobile rights as below
  • x
  • convention:

Comment Reply

AalyY
zaytdinovaee     Released on 2018-5-11 16:07:05 Helpful(0) Helpful(0)

Posted by AalyY at 2018-5-11 02:54 1:- show softargu configinfor id 443 (the default value is 0) , try change to 1 using command onfig ...
User rights:
[%eSpace U1960(config)]#Show subscriber dn 8010
 
Subscriber
 
------ ---------- -------------- ------------ ------------ ------------------ --------- -------------- ------------- ------------ ----------- -------------- --------------- -------------- ----------------- ----------------- ---------------- --------------- ------------ ------------------- ------------------- --------------- -------------------- -------------- ------------------- ------------------ -------------- ----------------- ------------ ---------------- ------------- ------------- -------- 
  Dn     LongDn     DomainName     TermName     UserType     UserPriorLevel     State     CallSource     UserState     SubPBXNo     FaxMode     RegGroupId     BindUserNum     RemarkInfo     DirectDialTKC     RingTypeIndex     CentrexGroup     PickupGroup     PbxGroup     OutgoingRight       IncomingRight       Telephonist     BLFCallerDisplay     AreaNumber     OuterCRBTSwitch     UmsLonDnSwitch     ProxyRegId     ProxyRegState     VMSLevel     WmiSubscribe     SubsState     CACPrefix     SRTP   
------ ---------- -------------- ------------ ------------ ------------------ --------- -------------- ------------- ------------ ----------- -------------- --------------- -------------- ----------------- ----------------- ---------------- --------------- ------------ ------------------- ------------------- --------------- -------------------- -------------- ------------------- ------------------ -------------- ----------------- ------------ ---------------- ------------- ------------- -------- 
8010   8010       8010           8010         NORMAL       Advanced            IDLE     0              NORMAL        0            BYPASS      0              NA                             -                 -                 -                -               -            INTER/LOCAL/DDD/IDD INTER/LOCAL/DDD/IDD No              No                                  OFF                 No                                ---/---/---       Normal       NO               ---                         Disable  
 
 
 
------------ ----------------- ------------------- ----------- -------------- --------------- ----------------- --------------- 
  UserName     faxmailnumber     SipTermSubState     NewMsgs     voipdomain     BillingType     SuspendedFlag     PotswmiType   
------------ ----------------- ------------------- ----------- -------------- --------------- ----------------- --------------- 
             -                 Invalid             0           DefaultDomain  Periodic        No                --              
 
 
CallLimit
 
---------------- ------------------- ------------------- ---------------- ---------------- ----------------- ----------------- 
  PwdCallLimit     CallerTimeLimit     CalledTimeLimit     DDDTimeLimit     IDDTimeLimit     DDDLimitState     IDDLimitState   
---------------- ------------------- ------------------- ---------------- ---------------- ----------------- ----------------- 
NO               ---                 ---                 0(min)           0(min)           UNLOCK            UNLOCK            
 
 
Append Subscriber Information
 
----------------------- --------------- ---------------- ------------------- 
  OutgoingCustomRight     ConfFactory     DistinctRing     AutoAnswerDelay   
----------------------- --------------- ---------------- ------------------- 
-                       -               Off              0(sec)              

This article contains more resources

You need to log in to download or view. No account?Register

x
  • x
  • convention:

Comment Reply

zaytdinovaee     Released on 2018-5-11 16:08:52 Helpful(0) Helpful(0)

CFU parameters:

This article contains more resources

You need to log in to download or view. No account?Register

x
  • x
  • convention:

Comment Reply

zaytdinovaee     Released on 2018-5-11 16:11:22 Helpful(0) Helpful(0)

softargu 443 changed - no result ( cfu proceeding announcement, and restricting announcement after that)
[%eSpace U1960(config)]#Show softargu configinfor id 443

ID : 443
Type : protocol
Current Value: --
Desc : How To Take Original Called when SipTK Transfer[0:No(default) 1:As Caller 2:By Diversion]
-------------------------------------
==== Command executed success ! ====


[%eSpace U1960(config)]#Config softargu type 443 value 1

==== Command executed success ! ====

[%eSpace U1960(config)]#Show softargu configinfor id 443

ID : 443
Type : protocol
Current Value: 1
Desc : How To Take Original Called when SipTK Transfer[0:No(default) 1:As Caller 2:By Diversion]
-------------------------------------
==== Command executed success ! ====
  • x
  • convention:

Comment Reply

zaytdinovaee     Released on 2018-5-11 16:15:39 Helpful(0) Helpful(0)

There is no ForwardOutgoingRights parameter in my U1960 configmodify subscriber command. My ver:
Board type:

This article contains more resources

You need to log in to download or view. No account?Register

x
  • x
  • convention:

Comment Reply

zaytdinovaee     Released on 2018-5-11 16:18:16 Helpful(0) Helpful(0)

Board type: SCUB
Software version: V200R003C00SPC500B011 (Built on 2015/08/04 11:50:28)
Logic version: (U48)105(U42)105
PCB version: CH51VSCUB VER 0
Secondary BIOS version: 123
Primary BIOS version: 122
EHP version: EHP V100R006C00SPC217B067
  • x
  • convention:

Comment Reply

AalyY  Adept   Released on 2018-5-14 17:02:50 Helpful(0) Helpful(0)

Posted by zaytdinovaee at 2018-5-11 10:15 There is no ForwardOutgoingRights parameter in my U1960 configmodify subscriber command. My ver:Boar ...
I have forwarding Rights As Below

in your case you can do it using below, first login webpage Choose user , service configuration, Call forward uncoditional,
then edit and choose incomming call as Externaal, you will edit time and also incase you need Edit status of Forward(CFU is equal to call forward Status Any time start 00,00,00 end 23,59,59) as below

This article contains more resources

You need to log in to download or view. No account?Register

x
  • x
  • convention:

Comment Reply

AalyY
12
Back to list
Reply
You need to log in to reply to the post Login | Register

If the attachment button is not available, update the Adobe Flash Player to the latest version!
Fast reply Scroll to top