VCN 3000 IP Cameras Time Synchronization

[Copy the link]
Released on : 2018-5-5 01:13:37   Latest reply:2018-05-17 15:01:12
889 5
MA3    

  Help Card: (problem unresolve)
It was observerd that some 200 cameras out of 400 changed their timezone despite NTP was configured on Huawei VCN 3000. Before it was working fine.

If we want to re-synchronized the time  of all the cameras should we reconfigure the NTP or do we need to do any extra task and do it require a downtime for reload the server.

Thanks,
  • x
  • convention:

Comment Reply

Go to the specified floor
Salah  Moderator   Released on 2018-5-5 23:10:10 Helpful(1) Helpful(1)

did you have centralize NTP for your Network , or you only have NTP on your VCN ? what is action happened before this issue occur ? .

and for question i think it is better to reconfigure the NTP " in Downtime " most better .
  • x
  • convention:

Comment Reply Best answer

rabee Released on 2018-5-16 21:30
good 
Ahmed Mohamed Salah .

Enterprise Engineer
Admin of Intelligent Video Surveillance
AalyY  Adept   Released on 2018-5-15 05:44:53 Helpful(0) Helpful(0)

This post was last edited by AalyY at 2018-5-16 15:33. you need to configure NTP time synchronization on the OMUportal. After NTP time synchronization is configured,the connected cameras can time-synchronize with the server.

  • x
  • convention:

Comment Reply Best answer

AalyY
AalyY  Adept   Released on 2018-5-16 14:58:37 Helpful(0) Helpful(0)

This post was last edited by AalyY at 2018-5-16 15:33. you need to configure NTP time synchronization on the OMU portal. After NTP time synchronization is configured, the connected cameras can time-synchronize with the server.

  • x
  • convention:

Comment Reply Best answer

AalyY
delmoral16     Released on 2018-5-17 15:01:12 Helpful(0) Helpful(0)

Yes .
We have only two cameras but we use NTP server, global NTP server, open ports in fw to enable conection to these and work fine.
For us is very important enable ports in FW to comunicate, typically are blocked.
thanks
  • x
  • convention:

Comment Reply Best answer

Reply
You need to log in to reply to the post Login | Register

If the attachment button is not available, update the Adobe Flash Player to the latest version!
Fast reply Scroll to top