Caller number Is Not displaying on Phones Connected To U19 Via AT0 trunk,

[Copy the link]
Released on : 2018-4-17 20:32:00   Latest reply:2018-04-18 03:29:55
307 1
AalyY  Adept  

1:- confirm Feature of Number display Supported froPSTN side.

2;- Connect trunk directly to analog phone if not appear it is PSTN issue as feature not supported.if Number Appeared it is U19 issue, and you can do following.

1-      Open the U1911 webpage .

2-      Go to trunks .

3-      Go to the AT0 trunk configuration

4-      Choose Global then advanced

so you will had to make 4 tests by setting the following values , and check the result after each test .

 

1-      the value of CidMode is FSK and CLIP time is After ringing

2-      the value of CidMode is FSK and CLIP time is Before ringing

3-      the value of CidMode is DTMF and CLIP time is After ringing

4-      the value of CidMode is DTMF and CLIP time is Before ringing

Also , try to change also the value of the CLIP time with the value of the CidMode



  • x
  • convention:

Comment Reply

AalyY
Go to the specified floor
Chelun  Moderator   Released on 2018-4-18 03:29:55 Helpful(0) Helpful(0)

thanks for your sharing
  • x
  • convention:

Comment Reply

Reply
You need to log in to reply to the post Login | Register

If the attachment button is not available, update the Adobe Flash Player to the latest version!
Fast reply Scroll to top