The time on the camera is wrong and I can't configure it in batches

Hike · Created Sep 19, 2019 08:50:11

Hello Alexandru

You can download the IPC tool and configure the cameras in batches.
Please refer to this LINK
https://support.huawei.com/enter ... c-tool-pid-21500933

1.1 Setting the Camera Time

You can set the time zone and calibrate the time for a camera to synchronize the time between the camera and the NTP server.

Procedure

Step 1 From the camera list, select one camera or multiple cameras of the same model.

Step 2 Choose Settings > Others > Time Settings, or click clock in the shortcut toolbar.

The Time Settings dialog box is displayed, as shown in Figure 8-3.

Figure 8-3 Time Settings dialog box

clock 2

Step 3 Set time parameters.

1. Set the time zone where the camera resides.

2. Select Time Setting.

3. Select a time synchronization mode and set related parameters.

Table 8-1 describes the time parameters.

Table 8-1 Parameter description

Parameter

Description

Time zone

Indicates the time zone where the camera resides.

Time Setting

The time setting includes manual setting of time and NTP, GPS/BeiDou.

Synchronization

l Manual: Manually set the camera system time.

l NTP: Set the camera to automatically synchronize the time to the NTP clock source.

l GPS/BeiDou: Set the camera to synchronize the time through the GPS module. Only some models support this function.

Set Time

Set the system time of the camera.

Time Synchronization with the computer

Set the camera time to coincide with the PC's system time.To ensure that the camera is time-synchronized with the IPC TOOL, select this item.

NTP server

This parameter is available only when you select Enable.

Indicates the IP address or domain name of the NTP server.

Synchronization interval

This parameter is available only when you set Synchronization to NTP or GPS/ BeiDou.

Interval for the camera to synchronize time from the NTP server or GPS/BeiDou server. If the NTP server of GPS/BeiDou server time changes within an interval, the camera time does not change.

Step 4 Click OK.

If Success is displayed in the Operation column of the cameras, the time of the cameras is successfully set.

----End

This article contains more resources

You need to log in to download or view. No account? Register

x

Hike · Created Sep 19, 2019 08:50:11

Hello Alexandru

You can download the IPC tool and configure the cameras in batches.
Please refer to this LINK
https://support.huawei.com/enter ... c-tool-pid-21500933

1.1 Setting the Camera Time

You can set the time zone and calibrate the time for a camera to synchronize the time between the camera and the NTP server.

Procedure

Step 1 From the camera list, select one camera or multiple cameras of the same model.

Step 2 Choose Settings > Others > Time Settings, or click clock in the shortcut toolbar.

The Time Settings dialog box is displayed, as shown in Figure 8-3.

Figure 8-3 Time Settings dialog box

clock 2

Step 3 Set time parameters.

1. Set the time zone where the camera resides.

2. Select Time Setting.

3. Select a time synchronization mode and set related parameters.

Table 8-1 describes the time parameters.

Table 8-1 Parameter description

Parameter

Description

Time zone

Indicates the time zone where the camera resides.

Time Setting

The time setting includes manual setting of time and NTP, GPS/BeiDou.

Synchronization

l Manual: Manually set the camera system time.

l NTP: Set the camera to automatically synchronize the time to the NTP clock source.

l GPS/BeiDou: Set the camera to synchronize the time through the GPS module. Only some models support this function.

Set Time

Set the system time of the camera.

Time Synchronization with the computer

Set the camera time to coincide with the PC's system time.To ensure that the camera is time-synchronized with the IPC TOOL, select this item.

NTP server

This parameter is available only when you select Enable.

Indicates the IP address or domain name of the NTP server.

Synchronization interval

This parameter is available only when you set Synchronization to NTP or GPS/ BeiDou.

Interval for the camera to synchronize time from the NTP server or GPS/BeiDou server. If the NTP server of GPS/BeiDou server time changes within an interval, the camera time does not change.

Step 4 Click OK.

If Success is displayed in the Operation column of the cameras, the time of the cameras is successfully set.

----End

This article contains more resources

You need to log in to download or view. No account? Register

x

Alexandru · Created Sep 19, 2019 08:54:14

Thanks for your reply.

The time on the camera is wrong and I can't configure it in batches

Best answer

1.1 Setting the Camera Time

Procedure

This article contains more resources

1.1 Setting the Camera Time

Procedure

This article contains more resources

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

The time on the camera is wrong and I can't configure it in batches

Best answer

1.1 Setting the Camera Time

Procedure

This article contains more resources

1.1 Setting the Camera Time

Procedure

This article contains more resources

Third Party’s Trade Secret

My Followers