The status of the MA5616 board is abnormal

Hello, my friend!

When a board is started for the first time, it takes some time to load board software. During this period, the status of the board is displayed as autoload. After the loading is complete, the status of the board is displayed as normal.

I hope it will be helpful for you. Thank you!

Hello friend! hope it can help:

Root Cause:
The root cause of FPGA abnormal is that when processing ultra short packet, whose packet length is less than 16  bytes, the FPGA went into abnormal mode and the communication was interrupted.

As a result, the PON board detected the communication interruption and reset.

Solution:
We checked the latest version V800R018C10HP2013 and the issue does no longer exist due to the optimization on FPGA in the intermediate version.

Please download this version on the website below:

https://support.huawei.com/enterprise/en/access-network/smartax-ma5600t-pid-18133/software/23708616?idAbsPath=fixnode01|7919710|9856746|22892582|9858837|18133

https://support.huawei.com/enterprise/en/knowledge/EKB1002067964

Thanks!