the reseted router

Hello, friend!

I understand your problem is that no new WAN configuration was found.

Check whether the account used to log in to the device WebUI is an administrator account. Generally, only the administrator account has configuration permission.

Due to information security control, we cannot provide the device administrator account and password. You can contact the local device provider to obtain the device administrator account and password.

Thanks!

Hello,

How To Reset Huawei HG8245H Router With Button :

To perform a factory reset, please follow Below steps.
Power on the Huawei Router, place a paper clip or Pin into the hole on the back of the Router labeled Reset.
Hold paper clip or pin down for 10 to 15 seconds and release.
The Router will reboot on its own. Once the WLAN light stops blinking, the Router is reset.
Please Note, Resetting the Huawei router does not reset the firmware to an earlier version. It will only change all settings back to factory defaults.
Huawei HG8245H Default Login, Password and IP :

Once your Huawei router has been reset, it goes back to it’s factory defaults Settings.
IP address: 192.168.0.1 or 192.168.1.1
Username: admin
Password: admin or password
OR see back side of your device.

The normal hard reset is in the power-on state. Hold down the RESET button for a long period of time (longer than 10s) to restart the ONT with factory settings.


If the factory settings cannot be restored, check whether the hardware is faulty. If yes, contact the local dealer for replacement.

Hope this helps.
Thanks