Hello everyone,
After a GE*24 card is installed on an ENSP's AR router, IP addresses cannot be configured for interfaces on the AR router. Please help me! Thank you!
[Huawei-GigabitEthernet6/0/23]ip ?
source Source
[Huawei-GigabitEthernet6/0/23]ip
The board information is as follows:
[Huawei]dis device slot 6
AR2220's Device status:
Slot Sub Type Online Power Register Alarm Primary
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
6 - 24GE Present PowerOn Registered Normal NA
-------------------------------------------------------------------------------
Board Name : 24GE
Board Description : 24-port GE L2/L3 Ethernet Interface Card
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Port Port Optic MDI Speed Duplex Flow- Port POE
Type Status (Mbps) Ctrl State State
-------------------------------------------------------------------------------
0 GE(C) - auto 1000 full disable down