Got it

The parameter of trunk command is invalid, because the trunk has offline member interfaces

Created: Feb 21, 2020 08:39:45Latest reply: Feb 21, 2020 08:46:11 83 2 0 0
  Rewarded HiCoins: 0 (problem resolved)

Hello,

There is no interface belonging to the eth-trunk 10 on our CE6850-HI. But an error was reported when deleting the eth-trunk. How do I solve the problem? Thank you!

[SW]undo int Eth-Trunk 10

Error: The parameter of trunk command is invalid, because the trunk has offline member interfaces.

[~SW]dis int Eth-Trunk 10

Eth-Trunk10 current state : DOWN (ifindex: 128)

Line protocol current state : DOWN

Description:

Switch Port, PVID : 1, TPID : 8100(Hex), Hash Arithmetic : profile default, The Maximum Frame Length is 9216

Internet protocol processing : disabled

IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 08c0-212c-62d1

Current system time: 2020-02-21 06:55+08:00

Physical is ETH_TRUNK

Last 300 seconds input rate 0 bits/sec, 0 packets/sec

Last 300 seconds output rate 0 bits/sec, 0 packets/sec

Input: 0 packets,0 bytes

0 unicast,0 broadcast,0 multicast

0 errors,0 drops

Output:0 packets,0 bytes

0 unicast,0 broadcast,0 multicast

0 errors,0 drops

Last 300 seconds input utility rate: 0.00%

Last 300 seconds output utility rate: 0.00%

----------------------------------------------------------

PortName Status Weight

----------------------------------------------------------

----------------------------------------------------------

The Number of Ports in Trunk : 0

The Number of Up Ports in Trunk : 0

  • x
  • convention:

Featured Answers
Admin Created Feb 21, 2020 08:46:11 Helpful(0) Helpful(0)

Hello,

Please run the display current-configuration inactive command to check whether any interface exists in the eth-trunk10 in the offline configuration of the device. If so, run the clear inactive-configuration command to clear the offline configuration.

Please let me know if this works.

View more
  • x
  • convention:

Hobbit Created Feb 21, 2020 08:48:10
This works.  
All Answers
Popeye_Wang Admin Created Feb 21, 2020 08:46:11 Helpful(0) Helpful(0)

Hello,

Please run the display current-configuration inactive command to check whether any interface exists in the eth-trunk10 in the offline configuration of the device. If so, run the clear inactive-configuration command to clear the offline configuration.

Please let me know if this works.

View more
  • x
  • convention:

Hobbit Created Feb 21, 2020 08:48:10
This works.  

Comment

Comment
You need to log in to comment to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

My Followers

Login and enjoy all the member benefits

Login

Huawei Enterprise Support Community
Huawei Enterprise Support Community
Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.