Issue:The number of devices found by the SmartLogger exceeds the actual number of devices.
Solutions:
1. If the SmartLogger replaces a PV array and the connected device is not manually deleted before the SmartLogger connects to the new PV array,
As a result, the number of devices found times out. The number of inverters connected to the southbound interface is the number of inverters. Suggestion: SmartLogger replacement method
Manually delete all connected devices.
2. If the PLC is used for networking, check whether the problem is caused by the crosstalk of the PLC and check whether the redundant devices are a device of adjacent subarrays; You are advised to import the anti-crosstalk list and enable the anti-crosstalk function of the PLC to avoid this problem.
