Hello friends!
This post enquires about the 'The interface traffic exceeds the threshold - Inbound Error Packet Ratio' alarm. Please check out below for more details.
ISSUE DESCRIPTION
I am currently struggling with The interface traffic exceeds the threshold alarm on the interface:
| Location Information: | Resource Name=XXXX/GigabitEthernet/XXX, Indicator Name=Inbound Error Packet Ratio, Granularity=15Minutes, Threshold Type=High, Indicator ID=41 |
| Additional Information: | Threshold=0.05 %,Indicator Value=1.67 %, Interface Description=XXXX |
How can I increase the threshold for Inbound Error Packet Ratio? I've checked the interface and the CRC and symbol errors don't increase:
Input:
Unicast: 68111 packets, Multicast: 0 packets
Broadcast: 39882 packets, JumboOctets: 0 packets
CRC: 1 packets, Symbol: 0 packets
Overrun: 0 packets, InRangeLength: 0 packets
LongPacket: 0 packets, Jabber: 0 packets, Alignment: 0 packets
Fragment: 47 packets, Undersized Frame: 0 packets
RxPause: 0 packets
Any suggestion please? Thanks!