Hello, everyone!
Today, I'd like to share a case with you.
Product Model: SmartAX MA5616, SmartAX MA5818
Problem Description
The dpbo config is correct on the MA5818 but does not take effect.
Problem Analysis
The PSD is different, see the following figure:

Different PSDs are caused by different dpbo profiles:

Root Cause
Configuration missing
Solution Description
Run the following command:
xdsl dpbo-profile quickmodify 180 assumed-exchange-psdenable 64:73,256:73,314:84,376:93,512:96
Welcome to leave a message below.
We study together.
Thank you!


