Hello, everyone!
In this post, I would like to share with you the difference between X40 and EX40 and their respective characteristics.
X40 Appearance of the Front Panel
X40 Application
Application Scenario 1: Multiplexing or Demultiplexing of 40 Channels of Optical Signals in the Two-Fiber Bidirectional System
Application Scenario 2: Multiplexing or Demultiplexing of 18 Channels of Optical Signals in the Single-Fiber Bidirectional System with Optical Amplifiers
Application Scenario 3: Multiplexing or Demultiplexing of 20 Channels of Optical Signals in the Single-Fiber Bidirectional System Without Optical Amplifiers
X40 Working Principle and Signal Flow
Mapping relationship between optical ports on the X40 board and frequencies
EX40 Appearance of the Front Panel
Front panel of the EX4001 board
Front panel of the EX4002 board
EX40 Application
Application Scenario 1: Multiplexing or Demultiplexing of 40 Channels of Optical Signals in the Two-Fiber Bidirectional System
Application Scenario 2: Multiplexing or Demultiplexing of 18 or 35 Channels of Optical Signals in the Single-Fiber Bidirectional System with Optical Amplifiers
Application Scenario 3: Multiplexing or Demultiplexing of 20 or 40 Channels of Optical Signals in the Single-Fiber Bidirectional System Without Optical Amplifiers
EX40 Working Principle and Signal Flow
Mapping relationship between optical ports on the EX4001 board and frequencies
Mapping relationship between optical ports on the EX4002 board and frequencies
That's all, I hope you like it.
Thank you!
