1.Check whether the power indicator of the CPE is red. If the power indicator is off, it indicates that the power supply is faulty. In this case, you need to verify the CPE and POE power supply. After confirming that the CPE and the CPE are faulty, return the faulty parts for repair.
2.If the four indicators on the CPE are always on, it indicates that the CPE is being started. Wait for 2 hours and then return the CPE for repair.
3.IP address of the LAN port on the Ping CPE. If the IP address can be pinged, use the ipop tool to connect to the Telnet. After the telnet is connected, contact R&D engineers for confirmation.
The CPE（EG860） cannot be started.
Created: Jan 25, 2019 06:02:08Latest reply: Jan 28, 2019 06:06:47
564
2
0
0
0
- x
- convention：
- Emotion(0)
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
