Hello, I will share with you how to deal with the problem that the OPS cannot identify the camera when the IdeaHub Pro is connected.
Problem Description
The system camera cannot be invoked on the OPS.
Possible Causes
The OPS does not obtain the camera permission.
Solution
Connect the PC and the IdeaHub to the same network segment.
Enable the Telnet protocol of the IdeaHub.
Log in to the IdeaHub WebUI and choose System Settings > Security > General. Set Telnet to Enable.
Open the cmd window on the PC and run the command as an administrator.
Enter the telnet IP address of the IdeaHub command and enter the user name and password for logging in to the IdeaHub Web as prompted.
Run the bsp usb get command to check the camera permission.
0: OPS; 1: Android
Run the mnt usbDeviceMode set 4 command to change the camera permission to OPS.
Restart the IdeaHub.
Problem Summary
The Ops does not have the camera permission. You need to manually obtain the permission.
This is my solution, how about yours? Go ahead and share it with us!
