Telnet to the camera on port 6060, but the connection fails

rongjie · Created Oct 12, 2019 01:55:42

Hello, bros

The possible cause is that the 6060 port on the network is not enabled.

Check whether the 6060 port is enabled on the network. This port must be enabled so that the IPC can communicate with cameras. The IPC tool uses port 6060 for communication.

I hope I can help you.

rongjie · Created Oct 12, 2019 01:55:42

Hello, bros

The possible cause is that the 6060 port on the network is not enabled.

Check whether the 6060 port is enabled on the network. This port must be enabled so that the IPC can communicate with cameras. The IPC tool uses port 6060 for communication.

I hope I can help you.

Telnet to the camera on port 6060, but the connection fails

Best answer

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

Telnet to the camera on port 6060, but the connection fails

Best answer

Third Party’s Trade Secret

My Followers