【Introduction】
【Contents】
What is RTU License?
Right to Use (RTU) is an authorization mode for selling hardware capabilities, such as the number of flows, capacity, and ports. An RTU license cannot be migrated after being bound to a device. RTU is a part of hardware value, and its life cycle is the same as that of the corresponding hardware.
How to Use RTU License of S5700 Switches?
How to Use the RTU License for Increasing the Rate of 40GE Uplink Interfaces?
The rate of six fixed uplink interfaces must be increased at a time.
After the license is loaded, run the assign port-type 100GE [ slot slotid | all ] command and restart the device to increase the interface rate to 100 Gbit/s.
How to Use the RTU License for Increasing the Rate of a Group of Interfaces?
Fixed Mappings Between Groups and Interfaces.
How to Make the Increased Interface Rate Take Effect.
Guidelines to Follow When the Command Configuration Is Inconsistent with the License Control Item.
Increasing the Interface Rate Using Multiple Licenses.
Multiple Interfaces Sharing the Same License.
Processing RTU Licenses in a Stack.
How Do I Activate RTU License to Increase the Interface Rate?
1.Upload the .dat license file to the device.
2.Load the license file on the device.
3.Run the following command to set the interface rate.
4.Check the interface rate before restarting the device.
5.Run the reboot command to restart the device.
6.Check whether the configuration takes effect and determine whether the interface rate takes effect based on the displayed interface name.
More details please click Here
Newest TechNotes
How to Install a License for a Stack System of S Series Switches
Why Does the S5700 Fail to Restrict User Access Through a Traffic Policy
Troubleshooting the Fault that Users Fail to Access Intranet Servers
Troubleshooting Failures to Log In to the Web System of AR Routers
How to Configure Option 43 When Huawei APs Are Connected to DHCP Servers of Different Vendors
