[Tech sharing] Guide for NCE-T to collect transmission device full data Highlighted

Hello, everyone!

In this post, I would like to share with you the collection of transmission device full data by NCE-T.

The NE data collection interface and procedure of NCE are different from those of U2000. Many engineers are not familiar with the collection method of NCE. Therefore, the following information is shared for reference:

1. Login NCE O&M plane (port: 31943), select the maintenance -fault diagnosis

2. Configure the NE collection items (connection protocol, port, account /password )

3. After finishing NE configure, create a new task for collection. 

4. Select the NE whose data needs to be collected and select the data collection mode (according to actual device type choose the corresponding model).

5. Start the task after configuring all collection items.

6. After the task process become 100%, click Download. The file will save to the download directory of the browser.

That's all, I hope you like it.

Thank you!