TE ping function

Hello, guys

TE can’t support ping hostname, only IP address. 

ccm Net

Function

Performs network diagnosis.

Format

ccm Net ping <ip> [times]

ccm Net traceroute <ip> [maxhopnum] [routetimeout]

Parameters

• ip: specifies the IP address.

• times: specifies the number of times that the IP address is pinged. If this parameter is not set, the default value 4 is used.

• maxhopnum: specifies the maximum number of hops in route detection. If this parameter is not set, the default value 10 is used.

• routetimeout: specifies the timeout duration for each route detection, in seconds. If this parameter is not set, the default value 5 is used.