System Time modification

Dear Friend! you try below steps:

To modify the system time of a ViewPoint 8000 series MCU, perform the following operations:
1. Log in to the MCU web interface.
2. Choose Settings > System > Time.
3. Click the button for obtaining the operating system time to synchronize the system time of the MCU with that of the computer used for login.
The GMT time refers to the time in GMT+0 time zone. To modify the system time of a VP9000 series MCU, perform the following operations:
1. Log in to the MCU web interface.
2. Choose Settings > System > Time.
3. Modify the MCU time parameter.

Thanks!

Hi, Laiheang!

Welcome to our community!

The following steps is how to change the system time for MCU8660.

1. Log in to the MCU using the command-line interface (CLI).

2. At the <MCU8660> prompt, enter system-view and press Enter.

3. At the [MCU8660] prompt, enter clock ? and set parameters according to the prompts and then press Enter. 

4. Run the quit command to return to the <MCU8660> prompt.

5. Enter save and press Enter.

Best wishes!

And the MCU800 is out of service. You are advised to purchase a new product.