Tang_li
Created May 24, 2021 08:09:03
(0)
(0)
Possible Causes The energy storage device is faulty. The energy storage device is disconnected. The battery circuit breaker is OFF when it is running. Handling Procedure If the battery fault indicator is steady on or blinking, contact your battery dealer. Check whether the energy storage enable/power/communications cables are correctly connected and whether the communication parameters are consistent with the RS485 configuration of the inverter. Check whether the switch for the auxiliary |
|
Tang_li
Created May 24, 2021 08:09:03
(0)
(0)
Possible Causes The energy storage device is faulty. The energy storage device is disconnected. The battery circuit breaker is OFF when it is running. Handling Procedure If the battery fault indicator is steady on or blinking, contact your battery dealer. Check whether the energy storage enable/power/communications cables are correctly connected and whether the communication parameters are consistent with the RS485 configuration of the inverter. Check whether the switch for the auxiliary |
BetterMing
Created May 29, 2021 02:19:54
(0)
(0)
The Fusionsolar portal does not measure the values, it only accepts the values reported by the inverters. However, data errors may occur due to network fluctuations or loose communication cables. You can contact the PV center and have them re-collect the data. Get the correct image. |