SUN2000-6KTL-M1 Total input power not registered correclty.
Created: Aug 19, 2021 09:31:05Latest reply: Aug 19, 2021 09:38:16
316
2
0
0
0
HiCoins as reward：
0
(problem unresolved)
So I have this issue that total input power is not registered correclty in logs of this inverter.
My maximum total input power of my PV intallation was 6779W, but when I calculate power from PV1+PV2 voltage and amperage, then I can see that the generator has registered more input power.
Can you fix that to show real total input power instead of cutting it with the efficency rule based on Active power?
In my picture I sould be able to see input power that is not cut at the top and Active power which is cut by the inverter limited power of 6600W.
Currently it is difficult to know what is my total generator power possible, becuase inverter is not logging proper value.
I have attached my export file with calculations.
- x
- convention：
- Emotion(0)
Featured Answers
|
|
|
All Answers
|
|
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
