SUN2000-6KTL-L1 - Export limitation (Zero to the Grid)
Created: Jun 10, 2021 10:35:31Latest reply: Jun 12, 2021 14:52:24
983
10
1
0
0
Rewarded HiCoins：
0
(problem resolved)
- x
- convention：
- Emotion(0)
Featured Answers
|
Hello, dear. If you want to connect to the grid with zero power, please select "Grid connection with zero power" in the "Active power" section. You can refer to the following information to limit the inverter to zero output. Connect to the inverter using the Fusionsolar APP and select the power limit in the settings menu.
Thanks! |
francisco67
Created Jun 10, 2021 11:20:52
(0)
(0)
Hello Better Ming, I do not have that options in the Iphone App and in the computer the options are also different. See images.
francisco67
Created Jun 10, 2021 11:26:40
(0)
(0)
*Fixed active power derating (W): *Active power percentage derating (%): *Reactive power compensation (PF): *Reactive power compensation (Q/S): *Reactive power curve adjustment: *Schedule instruction valid duration (s): *Max. active power (kW): *Shutdown at 0% power limit: *PF(U) voltage detection filtering time (s): *Active power change gradient (%/s): *Reactive power change gradient (%/s): *Overfrequency derating: *Trigger frequency of overfrequency derating (Hz):
francisco67
Created Jun 10, 2021 11:28:07
(0)
(0)
*Cutoff frequency of overfrequency derating (Hz): *Cutoff power of overfrequency derating (%): *Power recovery gradient of overfrequency derating (%/min): *P-U curve adjustment time（s）: Ps: I am not able to reply with images. 
BetterMing
Reply francisco67 Created Jun 11, 2021 00:41:36
(0)
(0)
You can also try the way Confucius provides to set it up on the web side.
Tang_li
Reply francisco67 Created Jun 11, 2021 06:19:09
(0)
(0)
Is the CT direction of your meter reversed? |
All Answers
|
Hello, dear. If you want to connect to the grid with zero power, please select "Grid connection with zero power" in the "Active power" section. You can refer to the following information to limit the inverter to zero output. Connect to the inverter using the Fusionsolar APP and select the power limit in the settings menu.
Thanks! |
francisco67
Created Jun 10, 2021 11:20:52
(0)
(0)
Hello Better Ming, I do not have that options in the Iphone App and in the computer the options are also different. See images.
francisco67
Created Jun 10, 2021 11:26:40
(0)
(0)
*Fixed active power derating (W): *Active power percentage derating (%): *Reactive power compensation (PF): *Reactive power compensation (Q/S): *Reactive power curve adjustment: *Schedule instruction valid duration (s): *Max. active power (kW): *Shutdown at 0% power limit: *PF(U) voltage detection filtering time (s): *Active power change gradient (%/s): *Reactive power change gradient (%/s): *Overfrequency derating: *Trigger frequency of overfrequency derating (Hz):
francisco67
Created Jun 10, 2021 11:28:07
(0)
(0)
*Cutoff frequency of overfrequency derating (Hz): *Cutoff power of overfrequency derating (%): *Power recovery gradient of overfrequency derating (%/min): *P-U curve adjustment time（s）: Ps: I am not able to reply with images.
BetterMing
Reply francisco67 Created Jun 11, 2021 00:41:36
(0)
(0)
You can also try the way Confucius provides to set it up on the web side.
Tang_li
Reply francisco67 Created Jun 11, 2021 06:19:09
(0)
(0)
Is the CT direction of your meter reversed? |
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
