This issue introduces 2013 Unified Storage T series storage Classic Cases TOP 50 Collection. The classic cases are from maintenance Cases and FAQs, and selected by Lifecycle Management Team (LMT). The number is fifty. Typical case collections provide you with common and frequently used operating and maintenance (O&M) cases, helping you quickly diagnose and rectify faults.
RAID：RAID failure, RAID group storage space discontinuity.
RAID Group Storage Space Discontinuity Due To LUN Deletion
RAID 5 Group Failure Due to Two Missing Member Disks
LUN：LUN links are in the Down state, LUN fails to be created, Reading and writing LUNs abnormity
Low Read Performance When Reading and Writing Large Files on LUNs Due to LUN Property Errors
File System Errors of Mapped LUNs Due To Network Cable Disconnection
Overlapped LUN IDs Cause that LUN Links Are in the Down State on an Application Server
A LUN Fails to Be Created Because the LUN Is Suspended
Disks：Slow disk response, Failure to access a slow disk
Low Read and Write Performance of Storage Devices Due To Slow Disk Response
Fan Noise Increasing Due to High Temperature of Disks
Western Digital SATA Disk Failure Due To Aborted Command Error
UltraPath：Ping-Pong effect, the installation is not properly, UltraPath software unavailable
Multipathing Software Unavailable Because It Is Isolated by Antivirus Software
Inaccessible Databases Due to the Multipathing Ping-Pong Effect
The UltraPath Cannot Be Loaded Due To Incorrect Software Installation Sequence
Controller：Controller startup failure, Power-On failure, Controller faulty
Startup Failure Due To Inconsistency Between the Enclosure MAC and That Recorded by the Coffer DB
The S3900 Is Powered Off Because of the High Temperature in an Equipment Room
ISM Unable to Display Chinese Characters Correctly in English Linux Due to Chinese Fonts Missing
Server：The link between the server and the storage system is abnormity, Server fails to be restarted
When the SUSE 10 SP2 Is Reading and Writing LUNs, an Application Server Fails to Be Restarted
Failure to Detect the WWN of the Application Server Because the HBA Port Is Set to Point to Point
Others：Login Through a Serial Port Fails Due to Inconsistent Serial Port Rates, The ISM Fails to Receive Reported Errors and Their Solutions, iSCSI Link Becoming Unstable Due to a Controller Fault, A Cluster Heartbeat Failure During Sun Cluster Read and Write Operations Causes a Reset of All
A License File Is Found Damaged After It Is Imported to the Storage System
Login Through a Serial Port Fails Due to Inconsistent Serial Port Rates
S5500T Failed to Be connected to Brocade HBAs
Performance Exceptions and Single-Link Down in iSCSI Bonding Mode of S2600T
The ISM Fails to Receive Reported Errors and Their Solutions
S5600 iSCSI Network Port Exception
Host Failed to Identify Expanded Space After Storage Capacity Expansion
ISM Unable to Display Chinese Characters Correctly in English Linux Due to Chinese Fonts Missing
