Hi guys!!
I have a question: How to configure sub-interfaces on S5700 Switch series? Example:
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]int g0/0/1
[Huawei-GigabitEthernet0/0/1]int g0/0/1.100
^
Error: Unrecognized command found at '^' position.
[Huawei-GigabitEthernet0/0/1]q
[Huawei]int g0/0/1.100
^
Error: Wrong parameter found at '^' position.
[Huawei]
Regards!!!!!