STP/RSTP Use Precautions

Latest reply: Jan 12, 2017 20:00:50 979 1 0 0

When STP or RSTP is enabled on a ring network, STP or RSTP immediately starts spanning tree calculation. Parameters such as the device priority and port priority affect spanning tree calculation, and the change of these parameters may cause network flapping. To ensure fast and stable spanning tree calculation, configure parameters such as the device priority and port priority before enabling STP or RSTP.

On a switch enabled with a spanning tree protocol, when a terminal connects to the switch, spanning tree calculation is performed again. As a result, it takes a long period of time for the terminal to obtain an IP address. In this case, disable the spanning tree protocol on the switch port connected to the terminal or configure this switch port as the edge port.

  • x
  • convention:

Created Jan 12, 2017 20:00:50 Helpful(0) Helpful(0)

good!
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Fast reply Scroll to top