To check the NAS engine, log in form the serial port as user support (default password: support@storage) and run the following command:
l cat /opt/HS/conf/version.conf
N8000V2R1_01:~ # cat /opt/HS/conf/version.conf
N8000V200R001C00SPC200B016|27750|Thu Aug 22 17:58:28 CST 2013
l cat /opt/HS/conf/product.ini
N8000V2R1_01:~ # cat /opt/HS/conf/product.ini
[INFO]
ProductModel=N8500
DeviceType=5
VENDOR=Huawei
ProductName=N8500
GATEWAY=No
INIT_INTERFACE_VERSION=1
To check storage units, log in to the controller from the serial port as user admin (default password: Admin@storage) and run the following command:
l showsys
admin:/>showsys
===========================================================================
System Information
---------------------------------------------------------------------------
System Name | storage001
Device Type | OceanStor S5500T
Current System Mode | Double Controllers Normal
Mirroring Link Status| Link Up
Location |
Time | 2011-09-02 03:23
Device Serial Number | 17171818fffffsss
Product Version | V100R00XC00
iSCSI Device Name | iqn.2006-08.com.huawei:oceanstor:210063732:a
==========================================================================
l showupgradepkginfo -t 1
admin:/>showupgradepkginfo -t 1
======================================================
Upgrade Package Information
------------------------------------------------------
Controller ID Package Version Package Status
------------------------------------------------------
A V100R00XC00SPC000 Running
B V100R00XC00SPC000 Running
Huawei Storage Product Information Self-Service Platform: Link
Huawei Storage Product Multi-media Zone (Youku): Link
Huawei Storage After-sales Documentation Bookshelf: Link-CH and Link-EN
