The storage device is installed in the cabinet to ensure that:
Avoid the system frame front panel top to the front door of the cabinet so that the front door of the cabinet cannot be closed.
The distance between the rear end of the system frame and the back door of the cabinet is not less than 90mm, so as to avoid the cable top of the back end of the equipment to the back door of the cabinet, affecting the cable clothing and the closure of the back door of the cabinet.
If the distance between the front mounting bars and the inner side of the front door does not meet the installation requirements, use U-shaped brackets to shorten the distance between the front panel of the system enclosure and the inner side of the front door. The two pictures show the positions of the storage system before and after the U-shaped brackets are installed.
Figure1 Top view of the cabinet (there is no U-shaped brackets)
Figure2 Top view of the cabinet (Thes U-shaped brackets are installed)
Note：
The preceding cabinet space requirements do not consider the space that may be contained in the front and rear doors of the cabinet.
