Static ARP configuration on S series switch

ms.america · Created Apr 20, 2017 03:37:28

On an S series switch, except S1700, run the arp static command in the system view to configure a static ARP entry.
When the outbound interface is an Ethernet interface, run the arp static ip-address mac-address interface interface-type interface-number command to configure a static ARP entry.
When a VPN instance needs to be specified for the ARP entry, run the arp static ip-address mac-address vpn-instance vpn-instance-name command.
To configure a short ARP entry (only contains IP address and MAC address mapping, without VLAN or outbound interface), run the arp static ip-address mac-address command.
To configure a static ARP entry in which the IP address is 10.1.1.1, MAC address is 0efc-0505-86e3, VLAN ID is 10, and outbound interface is GE1/0/1, run:
[HUAWEI] arp static 10.1.1.1 0efc-0505-86e3 vid 10 interface gigabitethernet 1/0/1
- To configure a static ARP entry in which the IP address is 10.1.1.1, MAC address is 0efc-0505-86e3, and VPN instance is vpn1, run:
[HUAWEI] ip vpn-instance vpn1
[HUAWEI-vpn-instance-vpn1] ipv4-family
[HUAWEI-vpn-instance-vpn1-af-ipv4] quit
[HUAWEI-vpn-instance-vpn1] quit
[HUAWEI] arp static 10.1.1.1 0efc-0505-86e3 vpn-instance vpn1

New_commer · Created Apr 20, 2017 05:55:08

arp static 1.1.1.1 1-1-1 vid 100 interface GigabitEthernet 8/0/1

Static ARP configuration on S series switch

Third Party’s Trade Secret

My Followers

Enterprise

Consumer

Corporate

Carriers

Static ARP configuration on S series switch

Third Party’s Trade Secret

My Followers