1.Check the number of users associated with the AP. The number of associated users cannot exceed the upper limit allowed by the AP.
2.Check the channel and power of the AP. The channel and power must be set to fixed values, but cannot use default settings.
3.Change the connection mode on the AP to high-speed access.
4.Check whether upstream bandwidth limit is set on the AP.
5.Check antennas on APs: •The interval between the antennas on different APs cannot be smaller than 10 m.
•The interval between the antennas on the same AP cannot be smaller than 7 m.
6.Use the dedicated tools to scan adjacent-channel interference. Check whether there is strong interference near the STA.
STA receives strong signals from an AP, but the network speed is slow.
Created: Jun 15, 2018 07:58:30Latest reply: Jun 15, 2018 07:59:12
480
1
1
0
0
- x
- convention：
- Emotion(0)
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
