Got it

sta-offline-delay cannot work on the S6720

Created: Jul 10, 2019 14:39:20Latest reply: Jul 10, 2019 14:42:09 194 3 0 0
  Rewarded HiCoins: 0 (problem resolved)

Hi, Today we enabled the sta-offline-delay to stop user from authenticating again when they disconnect from the AP for a short while, Initially it works for while, then it requires users to authentication again.

Do you guys have any suggestions? It would be appreciated for any suggestions.

Thanks.


  • x
  • convention:

Featured Answers

Recommended answer

chenhui
Admin Created Jul 10, 2019 14:42:09 Helpful(0) Helpful(0)

Posted by user_3445655 at 2019-07-10 14:41 Hi, OK, here is the configuration:sta-offline-delay enablesta-offline-delay aging-time 86000sta-of ...
Would you please confirm the number of the connected users when the re-authentication is required when re-connect to the AP.
Because you configured sta-offline-delay max-number 1000, if the number of the accessing users exceeds 1000, by default, an AP is enabled to force STAs in offline delay state to go offline and allow new STAs to go online after the number of STAs reaches the maximum.
View more
  • x
  • convention:

All Answers
chenhui
chenhui Admin Created Jul 10, 2019 14:40:05 Helpful(0) Helpful(0)

@user_3445655 Hi,
would you please upload the corresponding configuration, it would be helpful to locate the problem.
View more
  • x
  • convention:

user_3445655
user_3445655 Created Jul 10, 2019 14:41:21 Helpful(0) Helpful(0)

Posted by chenhui at 2019-07-10 14:40 @user_3445655 Hi,would you please upload the corresponding configuration, it would be helpful to lo ...
Hi,
OK, here is the configuration:
sta-offline-delay enable
sta-offline-delay aging-time 86000
sta-offline-delay max-number 1000

we want the user could reconnect without authentication in 24 hours.
View more
  • x
  • convention:

chenhui
chenhui Admin Created Jul 10, 2019 14:42:09 Helpful(0) Helpful(0)

Posted by user_3445655 at 2019-07-10 14:41 Hi, OK, here is the configuration:sta-offline-delay enablesta-offline-delay aging-time 86000sta-of ...
Would you please confirm the number of the connected users when the re-authentication is required when re-connect to the AP.
Because you configured sta-offline-delay max-number 1000, if the number of the accessing users exceeds 1000, by default, an AP is enabled to force STAs in offline delay state to go offline and allow new STAs to go online after the number of STAs reaches the maximum.
View more
  • x
  • convention:

Comment

You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."

My Followers

Login and enjoy all the member benefits

Login

Huawei Enterprise Support Community
Huawei Enterprise Support Community
Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.