SPF module is not Working

Latest reply: Aug 3, 2018 22:12:14 598 4 3 0



[Issue Description]: After conect the SFP module the interface can not go up

<Huawei> display interface gigabitethernet0/0/0

GigabitEthernet0/0/0 current state : DOWN

Line protocol current state : DOWN

Description:HUAWEI, AR Series, GigabitEthernet0/0/0 Interface

Route Port,The Maximum Transmit Unit is 1500

Internet Address is 192.168.101.143/24

IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fc03-0202

Last physical up time   : 2016-01-12 11:32

Last physical down time : 2016-01-12 11:32

Current system time: 2016-01-12 11:32

Port Mode: FORCE FIBER

Speed : 1000,  Loopback: NONE

Duplex: FULL,  Negotiation: ENABLE Mdi   : -

Last 300 seconds input rate 0 bits/sec, 0 packets/sec

Last 300 seconds output rate 0 bits/sec, 0 packets/sec

Input peak rate 335248 bits/sec,Record time: 2016-01-12 11:32

Output peak rate 721224 bits/sec,Record time: 2016-01-12 11:32

The most common problem is forget to change the Port mode to fiber:


<Huawei> system-view
[Huawei] interface gigabitethernet 0/0/0
[Huawei-GigabitEthernet0/0/0] combo-port fiber




  • x
  • convention:

j84088811
Created Aug 3, 2018 20:40:19 Helpful(1) Helpful(1)

Also check Whether the Fiber Type is Correct.
<Huawei> display transceiver interface gigabitethernet 0/0/0 verbose
:)
  • x
  • convention:

Fernandoizsa
Created Aug 3, 2018 20:50:45 Helpful(0) Helpful(0)

i had the same problem in the past, i followed this steps and work very fine, this is a known issue. thanks a lot:)
  • x
  • convention:

xelamaster69
Created Aug 3, 2018 21:50:22 Helpful(0) Helpful(0)

Most of the time we do not ensure if the port it is completely turned on, also we do not check the "Port Mode". Recommend to check first those kind of configurations if someone wants to configure SFP module. SPF module is not Working-2714433-1
  • x
  • convention:

RubenMonroy
Created Aug 3, 2018 22:12:14 Helpful(0) Helpful(0)

Thanks for sharing, this may seem simple but sometimes we forget to check such basic things.
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login